LITEON 0225 PCB Switch

A

aekramer

Full Member
Jul 3, 2011
79
0
Netherlands
Hey all, I just received my X360USB and unlocked PCB v1.1, and got the key extracted, but now Im trying to flash the new fw onto the unlocked pcb, but Im experiencing some issues..
I read somewhere that I had to put the WP switch to 1, but now the unlocked PCB doesnt have a WP switch? It has an external switch, and for me it doesnt say WP just lock and unlock, so which is which? I tried both, but they just show up in jungle flasher as no drive detected

Thanks in advance :)

EDIT: Also the switch on my X360USB (special jungle edition), does it have to be ON or OFF?
 
Last edited:
frayed

frayed

DINDU NUFFIN
VIP Member
Dec 22, 2010
3,245
118
A galaxy far far away....
frayed

frayed

DINDU NUFFIN
VIP Member
Dec 22, 2010
3,245
118
A galaxy far far away....
aekramer said:
Thanks but I still cant figure it out.. Jungleflasher says no drive detected
Click to expand...
i guess you missed the part in huge red bold letters that says

FOR THOSE PEOPLE WHO SAY THAT THE UNLOCKED PCB IS DEAD / NO POWER / JF NOT DETECTING / NO EJECT - OF COURSE NOT BECAUSE ITS BLANK !!! - NOW READ THE TIP BELOW THIS IS WHAT YOU NEED TO DO
Click to expand...

TIP


Tip


If the TX Unlocked PCB doesn't detect at all and you can't get into vendor mode with the above method simply click Liteon-Erase and power cycle - you should then get into vendor mode (0x72) with no problems.



do yourself a favor, stop and take the time to read the tutorials completely not just skim through them. ALL the info you need is in the above links I posted for you
 
Last edited:
You must log in or register to reply here.