Phat DVD key motherboard extraction

[KILL3RCOOP3R]

I want to know how to get the DVD from the motherboard with the lastest dash board because key I pull from the drive I think is wrong.. Can some one tell me what I need this is for a phat xbox


Sent from iPhone

 

[scott1503]

You need to work out what mobo type it is eg. Xenon, jasper, falcon etc etc then read markings rgh roadmap there is a link in my sig

 

[iomega311]

You're going to need to R-Jtag or RGH it long enough to get the key. Then can return it to stock.

 

[KILL3RCOOP3R]

Is a jasper and I need the rjtag which discontinued so is there any other way??


Sent from iPhone

 

[Slayertex6]

RGH2 still works pretty good most of the time on Jaspers.

 

[KILL3RCOOP3R]

So I can rgh2 jasper with lasted dash correct ?


Sent from iPhone

 

[Slayertex6]

Yes, just use the pre-made ecc to get the cpukey, then open your original dump in j-runner.

 

[unkn0wn.92]

you'll need a Nand-X or JR-Programmer to read/write your nand and ecc and you will need a glitch chip "Coolrunner Rev C/CR3 Lite" is cheap and doing the job perfectly once done wrote your original nand to your console

 

[KILL3RCOOP3R]

I have all of those now my question is do I program the coolrunner like the slim or no


Sent from iPhone

 

[WildCard007]

You should read the J-Runner documentation. It literally walks you through it. It also has images that you can look at to show how to hook up RGH1 or RGH2. but the roadmap for noobs will help you understand what steps you need to take in order to find out the method for you.

 

[Slayertex6]

Yes you have to program the CR. I find the best one is timing file RGH2_A.

 

[KILL3RCOOP3R]

Thank you that's all I needed to know a b c d thing messed me up I'm used to doing slims selecting trinity or corona but didn't see this option when I loaded the NAnd and write coolrunner


Sent from iPhone

 

[gavin_darkglide]

Try all timing files, on my jasper the Falconv2 was the best, then if all you want is to boot xell to get cpu_key than just use any timing file, the first one that boots will be the one you want.(Some wont boot, others will boot but take forever, and the rest will boot faster. Definitely use CPU_RST cleaner with it for better performance.