Phat Xbox 360 Xenon (Modding)

[KroMatic]

Hello,

Sorry i am new to this Hard mod but this is what i know so far.

Motherboard (Xenon)
BenQ Drive (Flashed LT 3.0)
Dash Board (2.0.17489.0)

I have CR4 XL with 2 QSB (Nand - X, JRP/NANDX.CR V3)
J-R Programmer V2

My question is it possible to J-Tag, R-Jtag, RGH 2 it or anything in that matter. If So is there a tutorial on it, if you could send me in the right direction. I am not finding any guides or anything for Xenon. I figure where the QSB Nand - X would be solder to the board but i can't seem to find a spot for the QSB NAND-CR V3 to solder to the board.

Thanks in advance

 

[john mathews]

Hello,

Sorry i am new to this Hard mod but this is what i know so far.

Motherboard (Xenon)
BenQ Drive (Flashed LT 3.0)
Dash Board (2.0.17489.0)

I have CR4 XL with 2 QSB (Nand - X, JRP/NANDX.CR V3)
J-R Programmer V2

My question is it possible to J-Tag, R-Jtag, RGH 2 it or anything in that matter. If So is there a tutorial on it, if you could send me in the right direction. I am not finding any guides or anything for Xenon. I figure where the QSB Nand - X would be solder to the board but i can't seem to find a spot for the QSB NAND-CR V3 to solder to the board.

Thanks in advance

I wouldn't waiste my time with that junk of mb get a jasper or corona or trinity

 

[KroMatic]

Is it possible thro, I dont mind giving it a shot. I dont really Mind if its not worth it. Just if it could be done.
What is not worth it about it?
Is it possible to just get a motherboard by itself and replace what i have already since i got the DVD Key?

 

[GeekHeat]

Is it possible thro, I dont mind giving it a shot. I dont really Mind if its not worth it. Just if it could be done.
What is not worth it about it?
Is it possible to just get a motherboard by itself and replace what i have already since i got the DVD Key?

u can only rgh a xenon for key recovery. U can't use it to fully rgh it for Freeboot.
Plus it a crap mobo.
Just buy a cheap jasper Xbox. They are really cheap now.
Replacing motherboard won't help anyway, cos xenon has no HDMI slot and JASPER/falcon do. So it won't fit in the case properly.

 

[KroMatic]

thank you GeekHeat for the info. Do they have with the name of the MoBo before you buy, what do i look out for. Is it possible to Swap out the DVD Drive if i Get a New Xbox.
Which one is the best one to get, Jasper or Falcon Mobo?

Thanks for your help


PS: My friend has a Jasper Xbox 360

DashBoard : 2.0.12625.0

Would this be better?

 

[GeekHeat]

Jasper is more reliable. U can't just swap DVD drives. The DVD key on the DVD PCB has to match the the key on the mobo. So u need to swap dvd PCB board or flash the key over.

 

[KroMatic]

So that Xbox i could use the CR4 XL with the QSBs?
sorry to be a bug but is there a Guide on how to Flash over the Key or Swap PCB Boards?

Also want to thank you for taking the time and helping me out here.

should I update dashboard or keep it the same, or any dashboard works with CR4 XL ?

 

[GeekHeat]

Cr4 or any other glitch chip will work. U can rgh1 on that dashboard. So a coolrunner rev or lite will work well with that. However only clones are about so if u get a clone it will work, but there will be no support on here.

Why do u need to swap drives. U don't need to a flashed drive. Just use your original games and copy them to the HDD of the rgh.

 

[KroMatic]

I got the CR4 XL with the QSB. Best possible will be to RGH 1 on the current DashBoard of 2.0.12625.0. Is the Aud_Clamp needed for that method, or is it even used anymore?

 

[GeekHeat]

I got the CR4 XL with the QSB. Best possible will be to RGH 1 on the current DashBoard of 2.0.12625.0. Is the Aud_Clamp needed for that method, or is it even used anymore?

aud clamp is for JTAG or R-jtag install.

 

[KroMatic]

ok thank you for that. Once i start the process, if i get stuck or need any help I will report back in. Thanks for all your advice and help =D