PIF 5 ok?

[paper006]

I just wanted to know if Pif of 5 is ok?Does the result look fine?

My average is low but my max is reasonable high.

When i change eeprom settings should i first clear opc history and the cahnge the settings?

 

[Argentum]

Although I do everything as demonstrated I don't usually get recommended results when testing.

I test with nero not K-probe

However my games play fine even on XBL

 

[piromaniac]

PI MAX should be 100 or less & PI Average should be 5 or less
PIF MAX should be 4 or less & PIF Average should be 0.20 or less
Nero Score should be no less than 90
these are the guidlines that should be followed for obvious reasons if results don't come within the above and you use the backup you created might flag your console.. Its there for U to decide.

 

[Ubergeek]

PI MAX should be 100 or less & PI Average should be 5 or less
PIF MAX should be 4 or less & PIF Average should be 0.20 or less
Nero Score should be no less than 90
these are the guidlines that should be followed for obvious reasons if results don't come within the above and you use the backup you created might flag your console.. Its there for U to decide.

This is the same info these guys are given over and over and over again

yet they still ask :facepalm:

 

[jligg]

i dont know if you tried it yet but my results improved a ton by rebooting in safe mode and burning my disc..that way absolutely nothing is running but imgburn.. both imgburn and kprobe are able to run in safe mode

 

[djxxx]

You shouldn't need to boot in safe mode at all.. Booting windows up normal should be ok

 

[Mayor_West]

yes you dont have to boot in safe mode but if you do literally nothing is running but critical windows apps and image burn(it does help with burn quality)

 

[jligg]

yes you dont have to boot in safe mode but if you do literally nothing is running but critical windows apps and image burn(it does help with burn quality)

Exactly

Sent from my ADR6400L using Tapatalk 2 Beta-3

 

[Ubergeek]

i dont know if you tried it yet but my results improved a ton by rebooting in safe mode and burning my disc..that way absolutely nothing is running but imgburn.. both imgburn and kprobe are able to run in safe mode

you don't have to boot into safe mode at all

you are having this issue because your normal windows install is bogged down in sh*t and needs a cleanup.