LITEON DG-16D2S 'Play DVD' message after LT2 update

M

mach1ne

Junior Member
Nov 3, 2011
23
0
Hi Everyone, First time poster...I am having trouble getting my lite-on 83850c drive to work after i updated it to LT 2, I get the Play DVD when I insert a disk.
I’ll try to run through the course of events.
About a year ago I flashed my xbox with the LT Touch 1.1 and it worked fine (here’s a copy of the Log) – Have all the Dummy.bin files key.bin files etc
Sending LO83info request to I/O port 0x9150
................

0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To
0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61 The Birth Of Ma
0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February
0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF Twelve 2007 ...
0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0050: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0060: 4B 7D FD EF 27 EB C8 E8 - A9 20 FE 28 0F 06 DA AE K}..'.... .(....
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG
0030: 39 32 34 38 31 36 30 30 - 4A 46 47 20 20 20 00 00 92481600JFG ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Inquiry String saved to C:\Xbox 360 Flashing\xbox360 bin files\My 2nd Jtag\liteon-OFW.bin
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 35 30 35 30 43 2D 32 - 00 00 00 00 00 00 00 00 85050C-2........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 39 - 43 47 39 32 34 38 31 36 ....D609CG924816
0020: 30 30 4A 46 47 20 20 20 - 00 00 00 00 00 00 33 38 00JFG ......38
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00 ..

Identify String saved to C:\Xbox 360 Flashing\xbox360 bin files\My 2nd Jtag\Identify.bin

0000: 44 36 30 39 43 47 39 32 - 34 38 31 36 30 30 4A 46 D609CG92481600JF
0010: 47 20 20 20 FF FF FF FF - 39 46 30 32 31 35 36 36 G ....9F021566
0020: 31 36 42 39 31 34 58 58 - 41 30 FF FF 53 34 50 39 16B914XXA0..S4P9
0030: 36 30 31 30 30 30 30 30 - 30 38 39 38 33 34 00 00 60100000089834..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..

Identify String saved to C:\Xbox 360 Flashing\xbox360 bin files\My 2nd Jtag\Serial.bin
Extracted drive key 19A44D9D84A6D9E0B4EDAEBEC273C033
Extracted drive key Passed Verification !
Key data saved to C:\Xbox 360 Flashing\xbox360 bin files\My 2nd Jtag\Key.bin
Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 19A44D9D84A6D9E0B4EDAEBEC273C033
Firmware Osig: [PLDS DG-16D2S 8385]
Firmware is: LO83info Extract
Key added to database
Auto-Loading firmware file C:\Xbox 360 Flashing\old jungleflasher\JungleFlasher 0.1.75(152S)\firmware\ix-ltv1.1-838.bin
MD5 hash: 7eb4e4ceeb720e24e6c1a77e4e2a66ae
Genuine iXtreme Lite-Touch 1.1
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 8385]
Firmware is: iXtreme LT 1.1
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data copied from Source to Target
No Calibration data in source

Lite-On-Erase NOT sent
Sending Lite-On-Erase request to port 0x9150
............
Drive returned Status 0xD0
..........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x9150
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x9150
Erasing:............
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x9150
Drive is Lite-On..
So like I said, all was fine. Later on I found out that my xbox was Jtaggable so I went ahead and jtagged it, in the process I managed to short out the motherboard and was unable to get it going and it had the RROD. As it was still in warranty I sent it back to M$ for repair under the 3 red lights fix which they did free of charge.
When I got the xbox back they had fixed it and updated the dashboard (to prevent me jtagging it again) but they left the drive alone so it still worked with my backups. Anyway to cut a long story a little shorter I had another jtag which I am still using, but I decided to get myself on Xbox LIVE with my old repaired xbox. As it had been in the box for nearly a year it needed updating when i hooked it all up to the internet. Stupidly I never returned it to stock FW so the drive got updated to the 0251 revision.
So I got hold of all the latest jungleflasher tools and firmware and dusted off my old backup keys and got out the CK3 Probe. I decided as the drive had been updated by the M$ update I’d better get a fresh copy of the keys....But try as I might I was unable to obtain them as using the methods described (Phat, tray half opon etc.)
So I checked all the bin files (including my old NAND and KV info) to make sure I had the right keys, drive etc and all looked good and matched. I therefore tried using the old dummy.bin file to flash the drive using jungleflasher 0.1.89 and this is where all my problems start.
The first thing that troubled me was the Drive Properties, all looked as it should with the exception of the DVD Key....it said ‘not found’ i thought oh well I have the key anyway in my dummy.bin file so flicked over to the firmware tool 32 tab, loaded up my dummy.bin file in the source and the Target was set to the new LTPlus-025-v2.0.bin, pressed the spoof source to target a few times checked the keys matched ( may have entered the key in the manual spoofing option, not 100% sure). Switched over to the MTK Flash 32 tab, hit the lite-on erase and followed the on screen advise regarding powering off and on using the CK3 Pro and it went into vendor mode and I hit the Write button and it seemed to work ok.
Here’s the log file:
JungleFlasher 0.1.89 Beta (284)
Session Started Thu Nov 03 00:34:02 2011
This is a 32 bit process running on 3 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 8 windows drives A: C: D: E: F: G: H: J:
Found 2 CD/DVD drives D: J:

Drive is Lite-On..
Loading firmware file C:\Users\HTPC\Desktop\My 2nd Jtag\Dummy.bin
MD5 hash: 0c3d79af6ca01592237ee3e5f8493488
Inquiry string found
Identify string found
Drive key @ 0xA030 19A44D9D84A6D9E0B4EDAEBEC273C033
Firmware Osig: [PLDS DG-16D2S 8385]
Firmware is: LO83info Extract
Loading firmware file C:\Users\HTPC\Desktop\iXtreme Burner Max Firmware\ixtreme LT plus 2 01 Latest Firmware Pack\Firmware\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0xD0
........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xEC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xEC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0xEC00
Drive is Lite-On..

So I have tried flashing and reflashing using stock firmware old 83850c firmware but all results in the ‘Play DVD’ option when inserting a disk into the drive on my xbox. I’m not sure what to do next.

I hope one of you guru’s can help me revive this Xbox for the second time otherwise I’ll have to wait and try the Reset Glitch Hack.
If you need any files or more info then let me know, I’ve tried to give as much info as possible hence all the waffle.
Thanks in Advance....
 
Last edited by a moderator:
M

mach1ne

Junior Member
Nov 3, 2011
23
0
Yes both originals and backups result in play dvd

---------- Post added at 12:09 ---------- Previous post was at 12:08 ----------
dgenx said:
dose it play retail games.

also your should be using orig-02510C-1c000 as the stock fw,if you are on the latest dash.
Click to expand...
dgenx, i tried the stock f/w u sent me...same result 'Play DVD'
 
L

lqtdc

VIP Member
Jul 12, 2011
189
23
the problem is the key. you have a problems with the key.
try to check the key before flash.
 
M

mach1ne

Junior Member
Nov 3, 2011
23
0
dgenx said:
are you sure that you are usein the right key for that console
Click to expand...
I'm 99% sure, when i did the jtag I had a folder with the xbox serial number as the name and all the nand and kv info etc in it. The flashing details i have on my other computer (one i do my flashing on) in a folder with dummy.bin etc in....they all seem to match up.
Like I said I sen this to MS to repair, maybe they changed something? But the weird part is it still played backups so i can't see what they changed.
What are my options here? do the Reset Glitch Hack to get my key? if so what do i need?
I have a jtag kit (nandx)
 
L

lqtdc

VIP Member
Jul 12, 2011
189
23
if you dont get a fresh dump of the driver like dgenx says, you have to check the CPU-key to get the DVD key. maybe m$ changes the key of the console or chnge your console
 
M

mach1ne

Junior Member
Nov 3, 2011
23
0
dgenx said:
did you get a fresh dump of drive after you got it back from m$.
Click to expand...
I tried to do a fresh dump, but could not get the phat method or the drive half open method to work, so i used the stuff I had from the original flash i did.
Silly question, but when the new dash comes out in December, do you think it will flash the drive again and work?? Grasping as straws here...lol
 
knowlzy10

knowlzy10

BANNED
Sep 11, 2010
1,348
0
workington, cumbria, england
mach1ne said:
I tried to do a fresh dump, but could not get the phat method or the drive half open method to work, so i used the stuff I had from the original flash i did.
Silly question, but when the new dash comes out in December, do you think it will flash the drive again and work?? Grasping as straws here...lol
Click to expand...
cant see there been anymore dash updates that reflash fw on your drive, but could be wrong buddy, i'd say reset glitch the way to go mate or i no martin c does a service for retrieving keys off an hdmi motherboard:D
 
M

mach1ne

Junior Member
Nov 3, 2011
23
0
knowlzysam said:
cant see there been anymore dash updates that reflash fw on your drive, but could be wrong buddy, i'd say reset glitch the way to go mate or i no martin c does a service for retrieving keys off an hdmi motherboard:D
Click to expand...
and how much is this service from Martin C? Is this something I can do myself? are there tutorials on this? Questions, questions...lol
I'm in Dumfries Scotland..
 
B

beastyX

VIP Member
Mar 27, 2007
581
0
Lincolnshire, UK
Have you tried moving the laser? I could be way off but every now and again I have a customer email me after getting their drives back saying that it won't play anything, every single time Its fixed by moving the laser along the rail.

Sent from my Desire HD using Tapatalk
 
You must log in or register to reply here.