ANSWERED "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

[ssip96]

"Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Phat box, Lite-on with 0251 fw (drive fw shows 83850C on the sticker).

This is a bit tricky..
I have a .bin file saved that is of my drive, hacked LT 1.9 firmware.
Took my box and had it upgraded in a shop to 2.0 a while ago.

Now i figured, this time i can upgrade from 2.0 to 3.0 myself, since i have the hacked 1.9 with my drive's key.

So I chose that as the source, chose stock 0251 as target, spoofed, erased, wrote, outroed. all worked flawlessly just as the tutorial instructed.

plugged the xbox in, plugged a usb stick with the latest dash update to it and upgraded.

all seemed well, then i figured before i continue and flash to LT 3.0 i'de give it a try with an original (since it's in stock).

all i see is "Play DVD".

tried to do the whole process again and again... and also to flash to LT 3.0... no luck. on all backups\originals that is all i get.

Here's the begging of the log that contains the sources and target i chose upon upgrading to LT 3.0.
i don't have the rest though because the process was done on a friend's PC. i may be able to provide these later. however they all seem to match the tutorial...

Any ideas?..

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.91 Beta (300)
Session Started Sun Jan 15 00:49:03 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 2 I/O Ports.
Found 0 Com Ports.
Found 5 windows drives C: D: E: F: G:
Found 3 CD/DVD drives E: F: G:

Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\00278929.bin
MD5 hash: a717dda2c2cd03bf1c0af4cfe7c04201
Drive key @ n/a B368F1AEBDB64DEB169CD31FBB3F6B2E
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.9
Auto-Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

 

[Astromine]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Are you sure you used the original key for your drive when you flashed to 3.0?

 

[namyarb3]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

What he said^^^
play DVD is sure sign of a 'keyless' drive, or the wrong key for the motherboard.

 

[x360ccm]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

you load your dummy into source not the orig-02510C-1c000.bin

and LTPlus-0251-v3.0 into target


then spoof source to target.

Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Frankly, the 1.9 bin that I used also came from the shop a long time back.
All that I am certain of is that I chose had the correct one chosen as source and spoofed.
After some research, I thought that they gave me the wrong key, and I guess I'm screwed.
However, I have done the same for a friend's Xbox, which also had his key sent to him by another shop. Got the same error.
That's one I figured it's more likely I have done something wrong than two different shops had given us two bad keys to different machines.

 

[x360ccm]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

you got the dummy.bin from both drives

you load it as source.

yeah looks like you loadin Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin

thats wrong

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Sorry that is a mistake... i've repeated the process with the following

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.91 Beta (300)
Session Started Sun Jan 15 01:21:43 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 2 I/O Ports.
Found 0 Com Ports.
Found 5 windows drives C: D: E: F: G:
Found 3 CD/DVD drives E: F: G:

Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\00278929.bin
MD5 hash: a717dda2c2cd03bf1c0af4cfe7c04201
Drive key @ n/a B368F1AEBDB64DEB169CD31FBB3F6B2E
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.9
Auto-Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

you load your dummy into source not the orig-02510C-1c000.bin

and LTPlus-0251-v3.0 into target


then spoof source to target.

Loading firmware file D:\Users\roni.f\Desktop\360\JungleFlasher v0.1.91 Beta (300)\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

you got the dummy.bin from both drives

you load it as source.

yeah looks like you loadin Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin

thats wrong

note that it's not the dummy.bin i'm loading. it's the lt 1.9 fw with the key just as it was flashed to my drive a year ago. (hit Save to file).
don't know if it matters... i just figured if it contains the key it could be used as source.

i've read some posts about the key being changed when going over from 1.x to 2.0+,
is it happening because i used a key that was extracted from 1.9, to flash from lt 2.0 to 3.0?.. (even though it's the same drive, same console?..)

 

[krypt1c]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Is it possible that you flashed your key to your friends box and his key to your box? or did you do them on different pc`s?

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Is it possible that you flashed your key to your friends box and his key to your box? or did you do them on different pc`s?

Impossible.. Separate folders file names etc. pretty sure about that part

 

[Jaster the Ghost]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Do you have your DVD tray half open? I did that once and it did not take. Was the yellow key showing? If not right click on your source target. Then click verify key. This will turn the key to yellow.

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Do you have your DVD tray half open? I did that once and it did not take. Was the yellow key showing? If not right click on your source target. Then click verify key. This will turn the key to yellow.

It wasn't half open. Should I have had it half open? Didn't see in the tut.
The yellow key was not showing... What does that mean?

 

[krypt1c]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Can`t see not having tray half open making a difference to be honest , have you got the tools to dump the drive , and see what key it gives you.

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Can`t see not having tray half open making a difference to be honest , have you got the tools to dump the drive , and see what key it gives you.

No unfortunately I don't have tools to dump the drive..

 

[mgmckee]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

It wasn't half open. Should I have had it half open? Didn't see in the tut.
The yellow key was not showing... What does that mean?

im assuming the yellow key your asking about is the key in mtk flash 32 tab and at the bottom of drive properties where it says dvd key? if it is all you have to do is when you load your bummy.bin in source right click in the source box and then you will have option to verify key but you will need to make sure that its your dummy.bin. then load your lt 3.0 as target spoof source to target then mtk flash 32, liteon erase, write, once finished click outro/ata reset. hope this helps

 

[krypt1c]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Right , all that i can think of is that you have mixed up the key`s with your friends box , why not flash your drive with the other dummy bin you have from your friends drive

No unfortunately I don't have tools to dump the drive..

 

[m4rky8oy]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Unless you flashed your friends fw to your drive I think the guy who flashed your Xbox sent you the wrong key!
Coincidence I know but it's possible as well that whoever did your friends Xbox sent them the wrong key too

I think you should get in contact with who did your drive and see if you can send them your drive so they can verify the key from their key database (as long as they haven't deleted it! I know I have everybody's key who's consoles I've flashed)

Failing that you may have to RGH to get correct key

 

[ssip96]

Re: "Play DVD" on all backups & originals after attempt to upgrade to LT 3.0

Unless you flashed your friends fw to your drive I think the guy who flashed your Xbox sent you the wrong key!
Coincidence I know but it's possible as well that whoever did your friends Xbox sent them the wrong key too

I think you should get in contact with who did your drive and see if you can send them your drive so they can verify the key from their key database (as long as they haven't deleted it! I know I have everybody's key who's consoles I've flashed)

Failing that you may have to RGH to get correct key

Well. Eventually each my friend and I took each Xbox back to the shop which flashed it to begin with.
They had backups of the keys and were able to flag to lt 3.0.
Both denied sending us the wrong keys.
We have asked them to send the keys they have used this time to compare... Because I still have no idea what I did wrong... Followed the tutorial to the letter, (except for using flashed fw with key instead of .bin which to my understanding should not make a difference). The output was as expected, yet it didn't work...
I guess I would have to compare the keys they'll send me this time with those I used to see if I did in fact had the right keys.. Because I don't know what else could have gone wrong.
Anyway, thanks so much to all of you that have tried to help out. Really appreciate it