Ok new problem not sure what to do i used a tut here and did everything right well i think i did when turning the xbox on it blinks a green light but does nothing els wont boot to anything.The coolrunner red power lights on and a blinking green light from time to time.Please any advise.not sure what to do next?
RGH Please help after coolrunner install
- Thread starter switchback
- Start date
BL4K3Y
VIP Member
Is this a Jasper motherboard by any chance?
If so, add the cap across GND and point A on the CoolRunner (thanks to seanr28 for the image):
If so, add the cap across GND and point A on the CoolRunner (thanks to seanr28 for the image):
No its a falcon i id from the xbox plug on the xbox so as far as i know it is i flashed it with the falkon and i double check all that and inpact seen it so wow not to sure but i can try that
BL4K3Y
VIP Member
ok best pics i could there are 2 that were a bit of a bummer not sure if there is a better spot to solder reel tinny the c being one of them but anyhow here are the pics..
BL4K3Y
VIP Member
Those images are too blurry but I would re-do STBY_CLK and CPU_PLL_BYPASS because they appear to be bridging with other points.
Ya i did ever solder and double check everything your help been great finely got it.Its booting into Xell and fast minit i turn it on so now to see what the next steps are thanks agin...
BL4K3Y
VIP Member