COOLRUNNER Please help! Video link in thread

J

JuDo_KiD21

Full Member
Oct 8, 2011
29
0
Noth Carolina
Here you go


TX Product(s) used: J-R Programmer v1 With Speed Upgrade
Console Type: Trinity
NAND size: 16 MB
Dashboard version: 2.0.16203
CB version: 9188
Screenshot of NAND details from J-Runner:

J-Runner log:
===================================================
Thursday, July 31, 2014 6:27:56 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9188
Trinity
Reading Nand to F:\RGH Slim Console Software\J-Runner v03 (4) Core Pack\output\nanddump1.bin
Cancelled
Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Version: 01
Flash Config: 0x00023010
Writing Nand
nanddump1.bin
Done!
in 3:38 min:sec

Version: 01
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to F:\RGH Slim Console Software\J-Runner v03 (4) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:30 min:sec

Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
ECC created
Version: 01
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec

- - - Updated - - -

TX Product(s) used: J-R Programmer v1 With Speed Upgrade Console Type: Trinity NAND size: 16 MB Dashboard version: 2.0.16203 CB version: 9188 Screenshot of NAND details from J-Runner:
J-Runner log: =================================================== Thursday, July 31, 2014 6:27:56 PM J-Runner v0.3 Beta (4) Started WARNING! - Your selected working directory already contains files! You can view these files by using 'Show Working Folder' Button Checking Files Finished Checking Files Version: 01 Flash Config: 0x00023010 00023010 Trinity, Jasper 16MB CB Version: 9188 Trinity Reading Nand to F:\RGH Slim Console Software\J-Runner v03 (4) Core Pack\output\nanddump1.bin Cancelled Initializing nanddump1.bin.. Trinity RGH2 Selected Nand Initialization Finished Version: 01 Flash Config: 0x00023010 Writing Nand nanddump1.bin Done! in 3:38 min:sec Version: 01 Flash Config: 0x00023010 00023010 Trinity, Jasper 16MB CB Version: 9231 Trinity Reading Nand to F:\RGH Slim Console Software\J-Runner v03 (4) Core Pack\output\nanddump1.bin Reading Nand Done! in 3:30 min:sec Initializing nanddump1.bin.. Trinity Nand Initialization Finished ECC created Version: 01 Flash Config: 0x00023010 Writing Nand image_00000000.ecc Done! in 0:18 min:sec
 
Last edited:
keil423

keil423

VIP Member
Apr 4, 2011
1,954
88
South Dakota, USA
www.epicconsole.com
Pictures would be better but watching you video it looks like you forgot to put a bridge across 3-2 and I couldn't tell about jp.
No debug flash is usually cause by either no timing file writen to the coolrunner or no connection to the CPU rst.
 
J

JuDo_KiD21

Full Member
Oct 8, 2011
29
0
Noth Carolina
Got it guys! Xell booted and I got my CPU Key. I wrote my new new and it booted within 1 cycle. The way I fixed it is I removed the Slim QSB and soldered the wires directly. The problem was the "R3B15" point. The two points were soldered together instead of the one point soldered to the QSB/Wire (however you have it installed. Thanks for all of your help guys!

- - - Updated - - -

Got it guys! Xell booted and I got my CPU Key. I wrote my new nand and it booted within 1 cycle. The way I fixed it is I removed the Slim QSB and soldered the wires directly. The problem was the "R3B15" point. The two points were soldered together instead of the one point soldered to the QSB/Wire (however you have it installed.) Thanks for all of your help guys!
 
Last edited:
N

nath247

VIP Member
May 24, 2014
174
0
At least it's working now. The reason people were telling you if 3 and 2 were bridged is because it needs to be set to slim mode.
 
You must log in or register to reply here.