Please help w/ @.6 CE

P8ntballer

Junior Member
Jun 28, 2005
17
0
Hi I have aproblem well first I had a screwed harddrive that boots to an error 21 so I installed a 2.6 CE in and it was great I flashed the bios with Evox on a boot disk and then went and tried to restor my harddrive back so when it will boot up it would boot into MS with it of so now that won't boot up and my bank 1 won't boot up and bank 2 has not been flashed yet any help?

The HD is the Original and locked.
 
Last edited:

P8ntballer

Junior Member
Jun 28, 2005
17
0
matt77303 said:
do you still get error 21 when you try and boot the msdash? with the chip disabled?

Matt
When the Chips on it goes into Config Live loading and stops at Rox my box.
No error 21 when it's on it stays there see I corrupted the MS with softmodding so I tried to fix it but it did not work and I have bank 2 still.

Ps Can I reflash bank 1? And When you flash it stores it on the chip corect?
 

matt77303

Console Master
Feb 4, 2004
1,624
0
Bristol UK
i think you are going to have to make a evox boot disk and enable network on it, boot the xbox with the disk in the drive, then copy over the original msdash files via ftp, these files are available from the slayer disk. this will restore the msdash files and fix any ****ups that have ocurred while you where softmodding.

matt