plese help!!

[streatch]

Ok I have 1.6 with an X3. I had a good install untill to day. I thought that everything was great. when I was done it worked like it should. but today things went bad. I was playing a game with chip off when was done with game the light turned yellow. then I shut it off then when I tryed to turn it back on the lights on the switches will not stay lit goes off as soon as you release the power button and the other light will flash green, green, green,red and will do nothing.

Worked for a week. All I have done so far is flash the chip with X3_1959.

HEEEEELP!!

 

[icecreamguys]

Solder joint came loose (dry) somewhere inside.

Sounds crazy, but open it up and check it out.

-IceCreamGuys

 

[streatch]

I just took it all apart it seems to lookfine.

 

[icecreamguys]

First thing to check -

Are you getting TWO blue lights on the chip itself when you turn it on?

Is your external switch (Xecuter logo) lighting up? Red or Blue?

-IceCreamGuys

 

[streatch]

It looks like only one blue light.
No

 

[icecreamguys]

One blue light means that either your 3v or 5v connection have come loose.

You HAVE to have two lights on the chip.

Basically, the "Cord" came unplugged. You are not getting power to your chip.

-IceCreamGuys

 

[streatch]

The logo light only comes on when i press the power button then goes off as soon as I release

 

[icecreamguys]

Check the 5v first, I would anyway.

 

[streatch]

Which wire or pin is the 3v

 

[streatch]

With a meter

 

[icecreamguys]

Check pins 9 and 15

 

[streatch]

Ok now when I went to turn it back on the power button was flashing orange, fan was coming on for a sec. back off ect. then turnes off.

 

[icecreamguys]

I would recheck your soldering around your pin header rebuild. I know that everything "Looks" good, but dry sockets are easy to miss.

-IceCreamGuys

 

[streatch]

Thanks a ton!! I will let you know how it comes out.