ANSWERED plz help 3rol 0022

[naruto1kun]

hi
i have done the jtag trick before since it took time with with me i take them to a solder shop to do the solder so now i have 3 xbox360 all falcon like the old one i did .... i started with the first one all solder thing done very good dump nand 4 times all compared matching only one 250 error in 277 had it in the first one didn't do a problem flash xell start it stays green for a minute the 3rol with 0022 flash original the same remove wires the same
started with the second one did soldering very goo checked after that on TV worked very good checked it in PC nand flasher detected went back home to make sure again before nand dump say hello you have got a 3rol 0022 same the first one didn't even wright xell nand is still pure made a nand dump after that it had no errors
what do you think is the problem ..
tnax

 

[sherlock]

0022 Unconfirmed: CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP.

http://team-xecuter.com/forums/showthread.php?t=53386

 

[naruto1kun]

is this a normal 3rol
can i fix it with the rrod xbox360 pro repair kit from Team Xecuter
tanx

 

[Hackerjac]

i'm sorry if i highjack this trend, but what does TSOP stand for ?

 

[Xmods]

is this a normal 3rol
can i fix it with the rrod xbox360 pro repair kit from Team Xecuter
tanx

0022 is not a normal rrod error 0102 is the most common 0022 is a bridge point under the bga and would need a reball it it wasn't jtag related

flash the original nand back to the console will it boot? did it boot prior to jtagin? pics of install or solder points


hackerjac Google tsop if u want to discuss it more please start your own tread thanks

 

[naruto1kun]

the first one didn't work after jtag i flashed back the original and removed the wires it is the same
the second one only worked ones the second time it didn't work nand is still not touched in this one
note : i use 1N4148 diodes

 

[naruto1kun]

dear sir
i just noticed that Occasionally D1 and D4 blink red as well, but there is no video. Also D1, D2, D4 will stay on green sometimes,after these i get 3rol and 0022 I have identical dumps
and i did another xbox today the same way it worked the only thing different i used a QSB on this one the ones i have problem with i used direct wire method
tanx

 

[manwithoutname]

Can you please post high resolution pictures of the one you used wiring method with. Good close ups to the soldering joints and the diodes and their direction.

 

[naruto1kun]

in one i didn't touch the nand just one dump and didn't work again the i checked it before hooking to computer it worked after that it didn't i removed all the wires still the same still didnt wright xell i am thinking of removing the qsb and putting them in this one
i checked the nand dump in 360 flasher it show 5770 and no bad blocks