ZEPHYR point missing off motherboard

KILL3RCOOP3R

KILL3RCOOP3R

Full Member
Dec 3, 2013
68
0
  • Console Type: Zephyr
  • Programmer Used: JRP v2.0
  • NAND Size:unknown
  • Dashboard version:lastested
  • CB Version: 4569
  • J-Runner log
  • Flash Config: 0x0119801001198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 4569
    Zephyr
    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump1.bin
    Cancelled
    Version: 10
    Flash Config: 0x01198010
    01198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 4569
    Zephyr
    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump1.bin
    Reading Nand
    Done!
    in 3:28 min:sec


    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump2.bin
    Initializing nanddump1.bin..
    Zephyr
    Jtag Selected
    Nand Initialization Finished
    Reading Nand
    Done!
    in 3:29 min:sec


    Comparing...
    Nands are the same
  • Detailed Description of the Problem
  • Was the console working before you started: Y
  • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: didnt get this far
  • How long is the light on for each time N/a.
  • ok so problem is i have cr4 xl and the jtag alt v2. There is a point i believe i need to solder. that is missing off my motherboard. not sure if i need this point but the pictures are here. sorry files are to big to upload
  • Flash Config: 0x01198010
    01198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 4569
    Zephyr
    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump1.bin
    Cancelled
    Version: 10
    Flash Config: 0x01198010
    01198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 4569
    Zephyr
    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump1.bin
    Reading Nand
    Done!
    in 3:28 min:sec


    Reading Nand to C:\Users\KILL3RCOOP3R\Desktop\JRunner283_Core\output\nanddump2.bin
    Initializing nanddump1.bin..
    Zephyr
    Jtag Selected
    Nand Initialization Finished
    Reading Nand
    Done!
    in 3:29 min:sec


    Comparing...
    Nands are the same
    Aud_Clamp Selected
    R-Jtag Selected
    Patching Jasper version 2.3 SMC at offset 0x12BA
    XeLL file created Successfully zephyr_hack_aud_clamp.bin
    Version: 10
    Flash Config: 0x01198010
    Writing Nand
    zephyr_hack_aud_clamp.bin
    Done!
    in 0:18 min:sec
 
Last edited:
A

antisober552

Senior Member
Sep 9, 2012
133
0
London
Correct me if i'm wrong but i'm sure your pictures does not match your Jrunner log, You Jrunner Log Shows That The Motherboard is an Zephyr But Your Pictures Show Your using an corona Motherboard But I Could Be Wrong
 
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
yea all zephyrs have the paint over that point that ive seen.have to scrape the paint as suggested.
 
K

KINGCOOP3R

Junior Member
Jan 1, 2015
19
0
Here are my complete imagines as for now I try to boot cell the system starts and debug light blinks twice and fans speed fast and I get left top and bottom red lights blink.
 
J

joshypoo

VIP Member
Feb 21, 2014
184
0
South OC California
console is overheating. heat sinks are not flush with chip die. remove the heat sinks and re apply thermal compound. make sure old compound has Ben completely removed.
 
Last edited:
Krafter

Krafter

VIP Member
Apr 17, 2011
3,737
118
Indiana
joshypoo said:
console is overheating. heat sinks are not flush with chip die. remove the heat sinks and re apply thermal compound. make sure old compound has is completely removed.
Click to expand...
Cleaning the old is the hardest part. It takes a lot of elbow grease but it really needs to be done. The chip needs to be polished to a shine before applying new paste.
 
ultimate360

ultimate360

VIP Member
Nov 11, 2013
786
48
MN, USA
Little tip: use brake parts cleaner to clean the chips. Takes off everything and leaves no trace of old paste anywhere within 10 seconds :)
 
  • Like
Reactions: Krafter
BrockThunderjam

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
Last edited:
R

rick48235

VIP Member
Sep 14, 2010
613
33
MICH
let it sat for 3 or 4 minutes then take one of those paddes to spread paste on chip and it will comes off easy scrape off easy
 
  • Like
Reactions: Krafter
You must log in or register to reply here.