RGH Posible fix for Falcon RGH 2 freezing problem

[fringle]

yes, i tried many diferent temp settings, used 15 diferent donors from other customers, 5772 and 5773, used smc and smc_config from all of than, test lowering temp and original temps, still freezes... i'm going crazy with that already, more then 50 diferent rgh images, with autogg, j-runner and xebuild, i don't know what to do...

As Martin has told me you shouldn't need the SMC just the smc-config. It's all I used from the donor which fixed mine. Try with just that and see if that helps.

 

[vinin_hc]

thanks for all the help, i used a donor smc_config from a falcon on dash 13599, and lower the temps, now its working fine....after many problems found a solution...

 

[OnkelM]

first, hi to all members and sorry if my bad english does not meet your liking


ok i have read all possible threads and posts about falcon and rgh2 but i still cannot figure some things out

1. some guys are telling to use another route for post_out1 but nobody is actually telling which route he used after posting that another route worked for them.
- so whitch routes are alternatives to test?

2. i have read that RGH in general makes the xbox temperatures rise. is this fact or just a falcon mythos? in fact i think this is right because in stock nand, my xbox has never frozen.

with the hacked nand the xbox freeze. and the point is, if i set the temperature values in xebuild to 75% (for example) the xbox works for like 300% longer than with the AUTO-Values.

i also tried to reduce the thermal settings in SMC config with the same result as described above.

- so basically i just want to know if the higher temps are a side effect from the hacked nand? Or not?

3. with that all say'd i have tried the tips but nothing helped. The xbox always freezes whyle staying (idle) at the dashboard...

are there any new tips that i could user?
do you have one or more proper post_out routes that helped stop freezing?

thanks and by folks

 

[Martin C]

1. nothing to do with POST_OUT1.

2. Temps nothing to do with RGH.

3. Did you try the other SMC configs?

I've attached another (RAW with spare data - use nandpro / J-Runner to write it at address 0x3DE). This one worked fine for me at RGH2.

 

[OnkelM]

1. nothing to do with POST_OUT1.

2. Temps nothing to do with RGH.

3. Did you try the other SMC configs?

I've attached another (RAW with spare data - use nandpro / J-Runner to write it at address 0x3DE). This one worked fine for me at RGH2.

Thanks. Should your file be a smc-config.bin? If so it diddnt work. The file in the archive was only 33 KByte. I thout the SMC config should be 64 KByte. Jrunner abortet image creation With error.



BUT. I thout i should check out the donor SMC config from d**ko316 a second time. Downloaded it again and put it in the directory xebuild/data. When jrunner asked if the found SMC config file should be deleted i choosed no and flashed this nand.

Now all works and i never ever got a freeze anymore. Played my copy of skyrim throu last night. !!!





Gesendet von meinem GT-I9100 mit Tapatalk 2

 

[Martin C]

Thanks. Should your file be a smc-config.bin? If so it diddnt work. The file in the archive was only 33 KByte. I thout the SMC config should be 64 KByte. Jrunner abortet image creation With error.

That's because you didn't read my post. Read it again.

 

[OnkelM]

That's because you didn't read my post. Read it again.

oooops, i'm very sorry,
my bad

will try to write you smc with nandpro the next m$ update

 

[Martin C]

The beauty of dumping the config sectors as raw with ECC is you don't need to build a new NAND to test them. Just write to 0x3DE to test.

 

[Fu-Raz]

Martin, could you tell us how we do that? (write the config to 0x3DE). Is this in J-Runner's custom Nand/CR functions? If so, what size and length do we choose?

 

[Martin C]

Martin, could you tell us how we do that? (write the config to 0x3DE). Is this in J-Runner's custom Nand/CR functions? If so, what size and length do we choose?

Yep - you can do it all in the Custom NAND/CR functions. Select the config.bin file, choose write / 16 / and from address as 3DE. Leave the length blank as it's not needed.

 

[Antalpromille]

Or use nandpro
nandpro device*: -r16 config.bin 3DE 2
nandpro device*: -w16 config.bin 3DE 2

*device could be a virtual nand (updflash.bin or nanddump.bin if you want), usb or lpt.

 

[Martin C]

So you think only reading/writing 1 block of a 2 block config area is fine then? I hope that's not global advice you give out.

 

[Antalpromille]

So you think only reading/writing 1 block of a 2 block config area is fine then? I hope that's not global advice you give out.

No i do not think that, so its actually 3DE and 3DF that we want?

 

[Martin C]

No i do not think that, so its actually 3DE and 3DF that we want?

Yes, which is why my attached file was 2 blocks long.

 

[Antalpromille]

Yes, which is why my attached file was 2 blocks long.

Then im sorry, and i edited and corrected my post

 

[Fu-Raz]

I fixed my freezing falcon RGH2, by using this SMC_config.bin and lowering the temps in the advanced xebuild settings in jrunner.

I fixed mine with your smc_config file also! I tried alot of different things. Multiple donor nands, configs etc. This is the one that worked.

This in combination with the settings in this post: http://team-xecuter.com/forums/showpost.php?p=672661&postcount=189 has gotten me a stable Falcon with RGH2 that boots in 2 - 3 glitches. Sometimes instantly.

I'm really thankful for all the help!

 

[DrunkenNinja]

Just to let you guys know this worked for me and eliminated the freezing problems I was encountering, now I just need to find a setting that will get the thing glitching, cause at the moment it does not even glitch 70% of the time... i'll get there, eventually, but these RGH2 Falcons are terrible...

 

[cj_goalie31]

when i try to create image without nanddump.bin it says kv.bin missing. Can someone explain how to do this please.

Thanks in advance.

 

[Slayertex6]

You need a dec_kv.bin renamed kv.bin placed in the XeBuild/data folder. Along with smc.bin and smc_config.bin.

 

[cj_goalie31]

Just thought i would share my results. I have a falcon rgh 2 cb 5774 and non of the smc-config files donated here worked to fix my problem. I actually couldnt even get 2 of them to boot. Not sure if thats because i have a 5774 cb or if its something with the 16202 dash but they wouldnt boot. Martin C config.bin did help extend the amount of time it took to freeze but still not good. I give up on rgh 2 because of the sounds of the team is close to releasing a new and more stable hack.