post out question

C

cubano123

Senior Member
Nov 9, 2013
149
0
the picture attached is a photo of under the fan of gpu in xbox 360 slim. one shows post out ok and one shows post out missing.


How to tell which one is post out? the difference i see is the threads on the board one the pic on the left and no threads on the pic on the rite.

so post out ok is the one on the left and the one without the thread is post out missing?
BEcuase i have a xbox which is corona v1 but the diagram from tx says that corona v1 post out ok BUT on my xbox 360 motherboad my post out looks like the diagragram on the right. wats up with that?

all i need to know is how to tell post out from no post out on dis diagram



 

Attachments

BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
The image on the left shows a motherboard with full POST and the image on the right shows a motherboard with no POST.

You need a POST Fix adapter for a motherboard that has no POST.
 
Last edited:
A

AllyNerd

VIP Member
Feb 25, 2013
1,179
0
Philadelphia
Which I believe means your v1 is actually a v3
 
C

cubano123

Senior Member
Nov 9, 2013
149
0
my corona nand chip looks exactly like a v1 corona on you guys diagram. it has the hynex KOR writing on the chip n everything BuT IT HAS NO POST OUT
 
C

cubano123

Senior Member
Nov 9, 2013
149
0
everytime i try put in the post fix adapter v2 i end up bending the pin trying to put it in because It doesnt sit flat on the prard for me to push becuz of the resistors. How do i place the post fix adapter without bending the pin?
 
C

cubano123

Senior Member
Nov 9, 2013
149
0
im all out of postfix adapters. is there any other way i can like solder a wire to get a postfix?
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
cubano123 said:
my corona nand chip looks exactly like a v1 corona on you guys diagram. it has the hynex KOR writing on the chip n everything BuT IT HAS NO POST OUT
Click to expand...
A 16MB console can have a Hynix or ST NAND flash.

The NAND brand does not determine motherboard versions.

I always find that Corona motherboards with missing R2C6, R2C7 and R2C10 resistors have no POST_OUT, but this is doesn't mean a thing.
 
C

cubano123

Senior Member
Nov 9, 2013
149
0
ok thanks guys.. one more question. i have a hitachi drive. Can the phat liteon pcb be modified to work in a hitachi drive.. I know it works on the lite on pgc in the dg16d5s drives
 
You must log in or register to reply here.