Power Button Disabled

[medic]

Please be patient with me, I have searched the threads and didn't find my particular problem listed.

I just did an xecuter 2.6 pin-header install on a 1.6 box. All went well. I used the LPC rebuild PCB. The chip lights up and acts normal.

Problem now - the power button has been disabled. The unit powers on when plugged in and only powers down when unplugged. No fragging, no other problems. I see no solder joints, etc.

Which solder point on the chip controls the power button?

Thanks,

medic

 

[Martin C]

Did you remember to remove pin 6 from the pinheader?

Martin

 

[medic]

Got it fixed

The problem was somewhere in the LPC rebuild kit - or more likely my installation of it. As soon as I took it out and manually soldered each wire into place, the problem was resolved.

Thanks all,

medic