CORONA Power Surge, now Corona v1 RGH on longer boots.

[sausages11]

• Console Type: Corona v1
• Programmer Used: JRP v2.0
• NAND Size: 16
• Dashboard version: 2.0.17349.0
• CB Version: 13181
• Image of the CR4 XL: http://i.imgur.com/fum5YOL.jpg
• Images of close-up soldering to motherboard http://i.imgur.com/lupyYCL.jpg http://i.imgur.com/o2SHZJz.jpg
• Detailed Description of the Problem: Work: Lightning strike hit house, knocked out the power. When the power came back on 6 hours later the console wouldn't boot, the green debug light still blinked every 5 seconds, i checked my wiring to see if anything melted or shorted, messed about with the jumpers etc but no dice, it didn't make the usual sound it makes when glitching so i thought the CR4 had died so got a new one. Flashed to stock. Removed power from cr4, it booted fine. Flashed beck to a glitched nand with a new cr4 and the same thing. It gives the debug light and everything, but it doesn't boot, or make the sound that is usually makes when glitching.
• Was the console working before you started: Yes
• Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Yes
• How long is the light on for each time about 1 second.

Here is what i got from the rater

CR4 Selected
Version: 10
Power Up
Waiting for POST to change
Post 03 - ... 
Post 06 - .... 
Post 03 - ... 
Post 03 - ... 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 06 - .... 
Post 07 - ..... 
Post 08 - ...... 
Post 09 - ....... 
Post 0A - ........ 
Post 0B - ......... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 03 - ... 
Post 06 - .... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 06 - .... 
Post 07 - ..... 
Post 0A - ........ 
Post 0B - ......... 
Post 0A - ........ 
Post 0B - ......... 
Post 0E - CB_B ENTRY REACHED 
Post 0F - GLITCH SUCCESSFUL 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 0C - .......... 
Post 0D - GLITCH CHECK COMMENCE 
Post 01 - . 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 04 - BOOT SEQUENCE STARTING 
Post 05 - ... 
Post 08 - ...... 
Post 09 - ....... 
Post 08 - ...... 
Most Fails(cumulative): 0x0F
Shutdown

Seeing as it boots without the CR4 connected, and i haven't changed the wires on the board i'm really confused. The console isn't dead because it boots stock but just doesn't glitch.

Any help?

 

[joshypoo]

that is really weird but i would try either a alternate RST-Post point or install a different chip and see if it boots.

Did you attempt to re tune the new CR4 or did you just adjust it the way you had your first CR4 in there

 

[sausages11]

I tried tuning it but nothing changes, i don't think a third CR4 would be of much help, especially not to my wallet . Im just going to solder the alternative RST point now and hope that works.

EDIT: That didn't work

 

[briggs01]

I tried tuning it but nothing changes, i don't think a third CR4 would be of much help, especially not to my wallet . Im just going to solder the alternative RST point now and hope that works.

EDIT: That didn't work

i had one like this lightening hit the house , the hanna chip was blown

 

[joshypoo]

i did not mean install another cr4 i meant like a different glitch chip. rev c or dgc rgx slim proto, know what i mean? just telling you what i would do hence you posting ( Any help? )

His hana chip is not blown. he wrote the retail IMG to it and it booted

 

[nofeloniesyet]

i did not mean install another cr4 i meant like a different glitch chip. rev c or dgc rgx slim proto, know what i mean? just telling you what i would do hence you posting ( Any help? )

His hana chip is not blown. he wrote the retail IMG to it and it booted

id say it isnt your hana as well,seeing how corona dont have a hana chip

 

[joshypoo]

haha i was waiting for someone to notice that.

 

[sausages11]

I sadly don't have any other glitch chips, I kept my slim with the cr4 and gave the other xbox i had, a jasper with a rev c, to my cousin.

 

[joshypoo]

you could purchase a x360ACE on ebay for 7 bucks and try 15432s new rgh 1.2 timing files/ SMC speed boost

 

[Kexxen]

you could purchase a x360ACE on ebay for 7 bucks and try 15432s new rgh 1.2 timing files/ SMC speed boost

RGH 1.2 is only for phats, I think.

 

[nofeloniesyet]

RGH 1.2 is only for phats, I think.

yea,but he made srgh for slims and works very well with cheaper glitchers too

 

[joshypoo]

Yes i can confirm this as well. see the thing with using the new RGH 1.2 files is there are no dips involved or jumpers.
now sometimes a console will like a CAP or resistor in series with RST and Post. you can also try different wire lengths for tuning.
but the point is using this method your majority of tuning is simply going through timing files.

it really kicks ass my friend. im not saying TX does not but 15432 did a great job.

if you try them with a X360ACE i can pretty much tell you that you wont be unhappy with the results.

 

[stucknvegas]

I am m glad I purchased 30 CR-4 chips ...I am going to corner the Market in orange counts no more discount installs

 

[joshypoo]

hey i agree with you stucknvegas
its not easy to get them now.

 

[stucknvegas]

Moddchip Central western union pre pay

 

[joshypoo]

i have never had to use western union. i purchase with ny credit card. unless its changed in the last 2=3 months. i have not had to buy any since i still have 13 left

 

[john mathews]

Vgc repair. Have them all day long

 

[joshypoo]

hey thanks for the info man. i have never ben to this site and prices are better then modchip central. they got a cygnos v2 for 7 bucks. damn im gonna buy a few of them

 

[john mathews]

Yep a buddy of mine he retired n then got back into it lol

 

[Kexxen]

yea,but he made srgh for slims and works very well with cheaper glitchers too

SRGH eh? I'll have to give it a try.