R-JTAG Power Switch doesnt work after RJTAG Installation PART II Second Post !

[delawaare]

<p>
You closed my first post. really funny how you deal here with your customers. You are the gods right ? Ok my next Installation and the same problem like here posted : http://team-xecuter.com/forums/showthread.php?t=140794 i dont want to write all again. read that post then you know. As you wished I upload now the pics here : When I try to start the console with POWER it doesnt work. When I unplug the RF Module then the xbox turns on himself. And yes I made a lot of RGHs and many other chips. and Yes only 8 RJTAG because this is not a power seller. And its always the same with you guys. Everyone is lame except your own crew.. I know..</p>
<p>
 </p>
<p>
 </p>
<p>
EDIT :<br />
<br />
Ah you know I so lame and such a noob as you always say, that it works when I remove the AUD_CLAMP sh*t !<br />
Then the Glitch works and the console also starts normal with power button.</p>
<p>
So you keep telling its a installation error ? <br />
I had this issue now in 4 consoles. and when I removed that AUD_CLAMP sh*t it works normal.</p>
<p>
 </p>
<p>
 </p>

 

[Oggy]

So you come here to ask for help with an attitude like that, heh.

 

[delawaare]

<p>
I dont ask for help,. I dunnot need your help.and my Attitude like that is because of prevoius answers and helps from you.I just wanted to make that clear.. That your RJTAG CHIP with AUD CLAMP isnt working in FALCONS</p>

 

[Dosk3n]

We have told you before in your last thread! You had damaged R2P12 as your soldering is rubbish!

If you had done any reading you would have found this http://team-xecuter.com/forums/showthread.php?t=140377 which if you had followed you would not have caused any damage. Either learn to solder or follow that guide but dont come on here slagging people off when its your own stupidity that got your original thread closed in the first place.

I dont ask for help,. I dunnot need your help.and my Attitude like that is because of prevoius answers and helps from you.I just wanted to make that clear.. That your RJTAG CHIP with AUD CLAMP isnt working in FALCONS</p>

Again if you read the guides you would know that soldering to R2P12 for Aud_Clamp installs is not needed. So why do it? Its in the guide above to cut off that area so that you do not solder to the resistor and damage it!

 

[Oggy]

Worked fine for me yesterday, and the day before.

 

[delawaare]

The console is working now with this settings :

Dips 7 + 3 = ON
1.2v JUMPER closed
JTAG AUD_CLAMP OPTION NO
470 JUMPER

I will not use that Clamp Option Yes method ever again. its not working and useless.

 

[Antalpromille]

The only things useless is your install skills (soldering invluded) and your attitude, the R-jtag with all its options works great!

 

[Martin C]

Your thread was closed because you decided you were above everyone else by not submitting a thread with the template information.

The reason you fail is because you don't read. If you took 5 minutes to read my sticky in this area of the forum, you'll see that for noobs like you there's a safer way to install. Don't blame the product - that's just stupid. (R)JTAG AUD_CLAMP is perfectly fine to use. Hundreds of thousands of people use it without issue.

This thread is now closed as you're STILL unable to follow the template.