So I was sitting here thinking about LT+ 2.0 and how I'm gonna go about updating my drive. Then I realised it was pre dash unlocked and it kinda made me think. Is there a chance M$ will lock the drive? I don't understand why they shipped unlocked either? Just wonder if anyone has some info! Cheers.
LITEON 0225 Pre dash unlocked?
- Thread starter onlinebug
- Start date
????????? only 9504 was shipped unlocked and after 13146 all slim drives are locked no matter what drive you have there are several methods to unlock the drives depending on if you have a MXIC or winbond chip.
M$ won't try and lock these drives again cause they presume they are already locked.
Remember to lock your drive again after you have flashed it
M$ won't try and lock these drives again cause they presume they are already locked.
Remember to lock your drive again after you have flashed it
J2G
VIP Member
Are you sure your not confusing it with a factory 9504 drive they are unlocked out of the box with 13146 dash or before the 0225 drive is locked coming from the factory.
Positive, I bought the board off this forum and am using it to play backups now. It has not been drilled or had the chip replaced nor is it a TX. I was just told it was a pre dash unlocked board?
Code:
Key found in KeyDB at record (36 - slim 9504 28)
Key is: 42D0983C679FBA19EDEB51278C5343A2
Key has been tested and verified, thanks C4eva !
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 39 35 30 34 00 00 00 00 - 00 00 00 00 00 00 00 00 9504............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 31 43 47 30 31 - 39 38 30 31 30 30 32 4A D711CG019801002J
0070: 4C 00 00 00 L...
Sending Password to Drive on port 0x0000
Done!
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Tom\Desktop\Dummy.bin
MD5 hash: f0f35a5931cf4792017cdd70174e0e21
Inquiry string found
Identify string found
Drive key @ 0xA030 736F4B89001CAD9511DF70ECCCB79CEF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Auto-Loading firmware file C:\Users\Tom\Desktop\Flashing tools\JungleFlasher v0.1.86 Beta (267)\firmware\LTPlus-0225-v1.91.bin
MD5 hash: 5a14a34b933602a94f8375f9ce88f803
Genuine LT plus v1.91
Drive key @ n/a D53B9CA4511C9BCFA5C31123166A5829
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 1.91
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 5877mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore verified OK !
Drive is Slim Lite-On..That's a 9504 PCB flashed to 0225 though....
If it wasn't locked after the flash, then M$ will pick up on the SPI status and flag it for a ban.
If it was locked.....you'll obviously need to "unlock" it to flash in future
If it wasn't locked after the flash, then M$ will pick up on the SPI status and flag it for a ban.
If it was locked.....you'll obviously need to "unlock" it to flash in future
It's a 9504? Isn't that spoofing and it's not live safe? I don't have any kit with me to check to see if it's been locked either.
Just attempted a repair on the Xbox support site and it said my warranty was still valid so I don't think I've been flagged. And I've contacted the guy who sold me the board to see if he issued the lock command because I know he reflashed it with the updated firmware.
Am I missing something here 
I can't see where the SPi 'Un-lock' command was sent in the JF log :eek2:
I can't see where the SPi 'Un-lock' command was sent in the JF log :eek2:
there wont have been an unlock command - the PCB was originally a 9504 - not lockedAm I missing something here
I can't see where the SPi 'Un-lock' command was sent in the JF log :eek2:
That's why I didn't see it :rolleyes2::facepalm:there wont have been an unlock command - the PCB was originally a 9504 - not locked
---------- Post added at 11:29 ---------- Previous post was at 11:26 ----------
So because it was a 9504 Winbond spoofed to a 0225 then without the Kamikaze Hack surely it can't be locked :eek2:
I've never tried, but I'm fairly sure u can issue a lock command to the SPI even without kamikaze can't u?
I'm pretty sure I saw a warning telling us not to press the SPi lock on a Winbond because they are buggers to unlock afterwards. I'll check through JF Tutorial
I'm not saying you can't but it needs someone a lot more experienced than me to say do it because I won't :eek2:
Another problem (apart from not being locked) is if M$ check the OSIG they will see a 0225 when they would be expecting to see 0272 (re-flashed 9504) and could also be potentially flagged for a ban :rolleyes2:
Brilliant, more great news haha.I'm pretty sure I saw a warning telling us not to press the SPi lock on a Winbond because they are buggers to unlock afterwards. I'll check through JF Tutorial
I'm not saying you can't but it needs someone a lot more experienced than me to say do it because I won't :eek2:
Another problem (apart from not being locked) is if M$ check the OSIG they will see a 0225 when they would be expecting to see 0272 (re-flashed 9504) and could also be potentially flagged for a ban :rolleyes2:
JF tutorial says not to press lock button on fat liteons if you do you then have to do the MRA hack
---------- Post added at 23:09 ---------- Previous post was at 23:05 ----------
What was your original drive 0225 or 9504?
As long as you flash the board with the same firmware as your original drive and then lock it you will be fine.
But remember if you want to update in the future you will need to get your dremel out
---------- Post added at 23:09 ---------- Previous post was at 23:05 ----------
What was your original drive 0225 or 9504?
As long as you flash the board with the same firmware as your original drive and then lock it you will be fine.
But remember if you want to update in the future you will need to get your dremel out