Probe v2 - any test for green light?

milhouse

Noob Account
Nov 25, 2010
5
0
Hi!

I have a CK3 Pro, a Probe v2 and a Liteon 74850C now 02510C because of the latest firmware.

I think in the past I screwed my Probe V2 and I would like to know if there is a test I can do to see if the probe 2 is still working before doing anything else.

I dont have the key yet. I dont have access to a second drive wich I can revert back to ORIG firmware either.

I have read that the R707 is disabled when with the latest firmware and that the probe 3 is the way to go. But I have also read about the switch that I can do on my probe v2 3.3v line.

I have tested the voltage on the R707 and there is still 3.3v passing through... Same on the R708. When I put the probe on any 3.3v live with the OP switch ON to turn the stanby light off and green light on for probing ON. the green light does not appear. MRA swith is set on probe of course!

Any suggestion to test further more the probe v2?

Thank you!

---------- Post added at 22:54 ---------- Previous post was at 22:48 ----------

I noticed that I have misread, 3.3v does not turn on the green light on the probe v2. Sorry!