probelm ftping xbox( I CAN C THE FINISHLINE BUT CANT REACH IT)

K

kylehawkins2005

Junior Member
Apr 15, 2005
18
0
OK BURN A COPY OF EVOX 3985 (NOT STATIC OR DCHP) I CHANGED evoxdash.xbe AND renamed to default.xbe I WENT INTO EVOX INI. AND CHANGDE SETTING :[Network]
SetupNetwork = Yes
StaticIP = NO
Ip = 192.168.0.2
Subnetmask = 255.255.255.0
Defaultgateway = 192.168.0.1
DNS1 = 0.0.0.0
DNS2 = 0.0.0.0

THAT THE SETTING MY XBOX GAVE ME
IM USING A CROSSOVER WIRE FROM NIC TO PC
I PING MY NETWORK(IT WAS GOOD)MY PC SEE THE IP # FROM XBOX- XBOX SEE THE CONNECTION FROM PC

I LOAD ISO COPY OF EVOX IN XBOX IT LOADS UP
CONFIRM SETTING ARE CORRECT
START FLASHINGFXP ENTER SETTING MATCHING NETWORK AND FOLLOW TUTITORS
IT SAY CONNECTION FAILS(CONNECTION TIMED OUT)
TRY UNLOCKING HD
TRY TO MAKE OTHER ISO WITH DIFFERENT IP# BUT SETTING ARE IN HARDDRIVE SOMEHOW CUZ I CHANGED IP# AND IT CHANGED SetupNetwork = NO

NEW UPDATE I CHECKED MY 3108 BIOS UNDER NETWORK AND IT SAYS
DCHP DISABLED
SET STATIC # 192.168.0.1
" 255.255.255.0
SET GATEWAY DEFAULT 192.168.0.100

SO IF I HAVE TO MAKE A ISO WITH THESE SETTING WILL IT CHANGE THE SETTING IN HD FROM THE FIRST ISO I MADE

:mad: :mad: :mad: NEED HELP PLZ
 
M

mattydread

VIP Member
Sep 16, 2004
228
0
Norwich
something basic, but completely missed on your thorough description, please tell me you have set the ip addess of your pc to

192.168.0.1

coz thats what the xbox is looking for to allow a connection to be established.

By putting these settings on a disk, they will only be set while the disk is runnning in the xbox, you are not putting anything on your HDD, that can only be done once you have sorted your ftp connection.

Other thinks to look out for, disable any firewall you may have running, that always stops me (i'm running Norton)

Hope this helps

Good luck
 
C

Catalyst

VIP Member
Mar 16, 2005
2,080
0
San Antonio
You must log in or register to reply here.