XGD3 Problem burning games

[gibi310]

So I finally decided to back up my games and i'm not sure what went wrong.
I flashed my iHas drive and it seems to be working good. The problem i have is verifying with Imgburn. It says it burns the game but can't be verified, any help will be helpful.

I 14:30:15 ImgBurn Version 2.5.7.0 started!
I 14:30:15 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 14:30:15 Total Physical Memory: 3,046,320 KB - Available: 2,257,352 KB
W 14:30:15 Drive E:\ (FAT32) does not support single files > 4 GB in size.
I 14:30:15 Initialising SPTI...
I 14:30:15 Searching for SCSI / ATAPI devices...
I 14:30:15 -> Drive 1 - Info: hp DVDRAM GT30L mP06 (F (SATA)
I 14:30:15 -> Drive 2 - Info: ATAPI iHAS424 B GL1A (H (USB)
I 14:30:15 Found 2 DVD±RW/RAMs!
I 14:32:10 Operation Started!
I 14:32:10 Source File: G:\backup\Forza 4.dvd
I 14:32:10 Source File Sectors: 4,267,015 (MODE1/2048)
I 14:32:10 Source File Size: 8,738,846,720 bytes
I 14:32:10 Source File Volume Identifier: DVD_ROM
I 14:32:10 Source File Volume Set Identifier: 17960000MS UDFBridge
I 14:32:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 14:32:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 14:32:10 Source File File System(s): ISO9660, UDF (1.50)
I 14:32:10 Destination Device: [0:0:0] ATAPI iHAS424 B GL1A (H (USB)
I 14:32:10 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 14:32:10 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 14:32:10 Destination Media Sectors: 4,267,040
I 14:32:10 Write Mode: DVD
I 14:32:10 Write Type: DAO
I 14:32:10 Write Speed: 4x
I 14:32:10 DVD+R DL Reserve Track: No
I 14:32:10 Link Size: Auto
I 14:32:10 Lock Volume: Yes
I 14:32:10 Test Mode: No
I 14:32:10 OPC: Yes
I 14:32:10 BURN-Proof: Enabled
I 14:32:10 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 14:32:10 Book Type Setting: DVD-ROM
I 14:32:10 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 14:32:42 Optimal L0 Data Zone Capacity: 2,133,520
I 14:32:42 Optimal L0 Data Zone Method: Copied From Original Disc
I 14:32:42 Set L0 Data Zone Capacity Succeeded!
I 14:32:42 Filling Buffer... (80 MB)
I 14:32:45 Writing LeadIn...
I 14:32:48 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 14:32:48 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 14:32:48 Writing Layer 0... (LBA: 0 - 2133519)
I 14:46:00 Writing Layer 1... (LBA: 2133520 - 4267014)
I 14:59:20 Synchronising Cache...
I 14:59:23 Closing Track...
I 14:59:24 Finalising Disc...
I 14:59:57 Exporting Graph Data...
I 14:59:57 Graph Data File: C:\Users\Gibi\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_MONDAY-SEPTEMBER-17-2012_2-32_PM_MKM-003-00_4x.ibg
I 14:59:57 Export Successfully Completed!
I 14:59:57 Operation Successfully Completed! - Duration: 00:27:46
I 14:59:57 Average Write Rate: 5,363 KB/s (3.9x) - Maximum Write Rate: 5,644 KB/s (4.1x)
I 14:59:57 Cycling Tray before Verify...
W 15:00:04 Waiting for device to become ready...
I 15:00:20 Device Ready!
I 15:00:21 Operation Started!
I 15:00:21 Source Device: [0:0:0] ATAPI iHAS424 B GL1A (H (USB)
I 15:00:21 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 15:00:21 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 15:00:21 Image File: G:\backup\Forza 4.dvd
I 15:00:21 Image File Sectors: 4,267,015 (MODE1/2048)
I 15:00:21 Image File Size: 8,738,846,720 bytes
I 15:00:21 Image File Volume Identifier: DVD_ROM
I 15:00:21 Image File Volume Set Identifier: 17960000MS UDFBridge
I 15:00:21 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:00:21 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:00:21 Image File File System(s): ISO9660, UDF (1.50)
I 15:00:21 Read Speed (Data/Audio): MAX / MAX
I 15:00:22 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 15:00:22 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 15:00:22 Verifying Layer 0... (LBA: 0 - 2133519)
I 15:09:35 Verifying Layer 1... (LBA: 2133520 - 4267014)
W 15:09:48 Failed to Read Sectors 2133520 - 2133551 - Reason: L-EC Uncorrectable Error
W 15:09:57 Failed to Read Sector 2133520 - Reason: L-EC Uncorrectable Error
E 15:46:14 Failed to Read Sector 2133520 - Reason: L-EC Uncorrectable Error
E 15:46:14 Failed to Verify Sectors!
I 15:46:15 Exporting Graph Data...
I 15:46:16 Graph Data File: C:\Users\Gibi\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS424_B_GL1A_MONDAY-SEPTEMBER-17-2012_2-32_PM_MKM-003-00_4x.ibg
I 15:46:16 Export Successfully Completed!
E 15:46:16 Operation Failed! - Duration: 00:45:53
I 15:46:16 Average Verify Rate: 1,550 KB/s (1.1x) - Maximum Verify Rate: 11,256 KB/s (8.1x)

 

[dascione]

You could try by burning at 2.4x some have better luck with the slower speed. Everyone has their own settings and it really depends on the batch of discs you got.

I haven't used 003's in awhile, but with my 001's I use
Force HT: Yes, Online HT: Yes, OverSpeed: Yes, SmartBurn: Yes
With Burn-Proof disabled
This is also at 4x

But, like I said that is with the 001's and those settings have just stuck with me, not like they're guaranteed to work for you.

I've heard suggestions for clearing OPC through EEPRom and disabling it on ImgBurn, you could try that too.

Best of luck!

 

[ll4sheezy]

Dont use imgburn to verify your backups. Especially xdg3 games. use kprobe or nero disc speed

Edit:

For verification I usually run my backups threw abgx.

 

[gibi310]

Dont use imgburn to verify your backups. Especially xdg3 games. use kprobe or nero disc speed

I'm going to run kProbe now, I was just wondering if this was a major flag I needed to look into. I remembered reading somewhere to turn on verify on Imgburn just to double check.

 

[ll4sheezy]

I never verify with imgburn because verifying doesn't check the quality of the disc. I go straight to kprobe or nero. If you want to get verify disc to work check out this thread. http://team-xecuter.com/forums/showthread.php?t=73612

 

[LiMiTz Cash]

MKM-001 Burn at 2.4x

MKM-003 Burn at 4x

 

[-DoC-]

I can verify with my setup and iHas drive that I get better results with MKM-001 burning at 4x rather than 2.4x.

It's all trial and error.

 

[LiMiTz Cash]

I can verify with my setup and iHas drive that I get better results with MKM-001 burning at 4x rather than 2.4x.

It's all trial and error.

Very true. I get better results at 2.4x with 001's.

 

[jsinger47]

Dont use imgburn to verify your backups. Especially xdg3 games. use kprobe or nero disc speed

This is poor advice. Making sure all the data is actually there is rather important. Especially for someone just starting and figuring out their setup.

In the case of a spelling error, I blame Tapatalk.

 

[ll4sheezy]

Sorry, I forgot to add that I run my backups through abgx for verification.

 

[gibi310]

I've burned backups before, but not my own, if that makes sense. I still can't get imgburn to verify but after running them through kprobe, they seem to be good burns.

 

[HoggFace]

I've burned backups before, but not my own, if that makes sense. I still can't get imgburn to verify but after running them through kprobe, they seem to be good burns.

I would not post things like that bud. If there not YOUR games your backing up then it's piracy.

 

[gibi310]

Yea, they're my backups. I turned 18 awhile ago and finally got a job to buy my own games and not beg my parents for money.

 

[GoRo2010]

IMGBurn usually fails with an I/O error on verify, that is normal on XGD3 games, use KProbe to verify disc quality.

 

[mindphuck]

just use kprobe, make sure your results are on par or better than the suggested values, cheers

 

[tuw_c]

Just to know,what are the kprobe "limits" for a "readable game" and what for an "online proof game"?