RGH problem Error: 250 reading block 185 !!!

[blacksnake]

hi

i have read the nand flash but i see this error

Falcon/Opus
Reading Nand to C:\Users\Acer\Desktop\j-tag programs\J-Runner v01 (263) Core Pack\J-Runner\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x01198010
Reading Nand
Error: 250 reading block 185
Done!


Is this a normal thing?
full log txt:


[CODE]Falcon/Opus
Reading Nand to C:\Users\Acer\Desktop\j-tag programs\J-Runner v01 (263) Core Pack\J-Runner\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x01198010
Reading Nand
Error: 250 reading block 185
Done!

Reading Nand to C:\Users\Acer\Desktop\j-tag programs\J-Runner v01 (263) Core Pack\J-Runner\output\nanddump2.bin
Initializing Nand..
Arm Version: 3
Flash Config: 0x01198010
Reading Nand
Error: 250 reading block 185
Done!

Comparing...
Nands are the same
* found flash image, unpacking....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
 * we found the following parts: 
SMC: 1.6
CB_A: 5771
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
 * this image will be valid *only* for: falcon
 * patching SMC...
Patching Falcon version 1.6 SMC at offset 0x12A3
 * zero-pairing...
 * constructing new image...
 * base size: 70000
 * encrypting CB...
7B67DFF4AE33BEEDB39398E8D6CCDE44
 * encrypting CD...
 * No separate recovery Xell available!
 * Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x1133F (0x9340 bytes) CB_A 5771
0x11340..0x1733F (0x6000 bytes) CD 8453
0x17340..0xBFFFF (0xA8CC0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
 * Encoding ECC...

100%
------------- Written into output\image_00000000.ecc

pleeeeez help me

---------- Post added at 06:57 ---------- Previous post was at 06:50 ----------

 

[AMIT]

don't need to worry mate ,it's just a bad block ,j-runner will remap that bad block for you !

 

[blacksnake]

Thank you very much

 

[AMIT]

Thank you very much

You're welcome :smile:!

 

[Martin C]

Just to make this clear:

Bad blocks are NOT good.

Remapped bad blocks (in the original dump) are ok.

If your dumps match and you get a bad block in the same area on both, you should be ok.

 

[AMIT]

Just to make this clear:

Bad blocks are NOT good.

Remapped bad blocks (in the original dump) are ok.

If your dumps match and you get a bad block in the same area on both, you should be ok.

From his Log !

Reading Nand to C:\Users\Acer\Desktop\j-tag programs\J-Runner v01 (263) Core Pack\J-Runner\output\nanddump1.bin
Arm Version: 3
Flash Config: 0x01198010
Reading Nand
Error: 250 reading block 185
Done!

Reading Nand to C:\Users\Acer\Desktop\j-tag programs\J-Runner v01 (263) Core Pack\J-Runner\output\nanddump2.bin
Initializing Nand..
Arm Version: 3
Flash Config: 0x01198010
Reading Nand
Error: 250 reading block 185
Done!

Comparing...
Nands are the same

So, he is probably OK !:rolleyes2: