alright, so I just finished installing and soldering everything as best as possible. when I press the power button quickly, the X is red and it turns the xbox on and off 3 times then says on and has no picture. when i hold in the power button to turn it on, the red light is on and the xbox boots normally on the factory setup. when I hold both buttons in, it does the same power on/off 3 times like before. both the hdd light and lan lights work fine. is it possible that I didn't solder the D0 wire good enough? (its a hard spot to get)
problem on booting with x3 installed (1.1)
- Thread starter aaronhume
- Start date
hmm okay now it sometimes just keeps restarting itself at random.... oh ya and the eject button doen'st make any difference when turning on.
okay more things I have noticed, are... when turning it on both blue lights are on on the chip.... when I bypass the power switch board, it does the same thing, and when i unplug the chip completely, it turns on then restarts a couple times before going normal, but stays on the xbox splash screen instead of the whole initial boot thing... so ya.
okay disreguard .... I just resoldered most of the pins and it works now just dandy but I appreciate any thoughts 
Xbox 360 Flashing East midlands and surrounding areas
Cheap reliable Xbox 360 drive flashing availible. Currently doing samsung, Hitachi and benq, Liteon coming soon.
Located coalville, Leicestershire east midlands.
Special offer
First 5 people get it at £15 then will charge £20 after so get in while its cheap. You can either drop off ur console and i'll flash while you wait or you can send your drive to me.
if you interested please email me at [email protected] or send me a pm on here thanks
Cheap reliable Xbox 360 drive flashing availible. Currently doing samsung, Hitachi and benq, Liteon coming soon.
Located coalville, Leicestershire east midlands.
Special offer
First 5 people get it at £15 then will charge £20 after so get in while its cheap. You can either drop off ur console and i'll flash while you wait or you can send your drive to me.
if you interested please email me at [email protected] or send me a pm on here thanks