RGH Problem reading Nand with 4GB RW kit

[part-timer]

J-Runner won't read nand on a Xbox360e 4GB Corona V6 board.. I have had problems previously with a diff console so little worried about doing this right so I installed the QSB with wires so I know i didn't bridge anything.

I haven't bridged the R2C4, R2C6 or R2C7 points or installed any other product.

Do I need to bridge these points?

Do you think it could be my USB card reader?

 

[BL4K3Y]

How can you be sure that your wiring is correct on that header?

Has that same configuration worked on another 4GB Corona?

 

[part-timer]

noticed i forgot some pics

 

[Martin C]

Just install the QSB FFS.

 

[part-timer]

I only didn't install it directly to board. I'm using the QSB

 

[jligg]

Like martin is telling you..thats not the way the product is meant to be installed

 

[part-timer]

Ok i removed wires and installed to motherboard like you said. tried reading nand. wouldn't read. put everything back together now xbox won't turn on. Now I have 2 consoles doing the same thing. when i had QSB attached with wires I put it back together and console would turn on now it doesn't. WTF

 

[jligg]

Look at your soldering in the first picture. Half the points dont even look soldered

 

[part-timer]

i looked at all my soldering with a magnifying glass before testing. they are all there.

My camera isn't the best

 

[scott1503]

Look at your soldering in the first picture. Half the points dont even look soldered

They don't even look lined up :facepalm:

 

[part-timer]

i beafed up soldering. still can't read nand but console turns on. the start/eject cable wasn't in properly. I have nand-x drivers installed on this comp, would that do anything?

JRunner just says physicalDrive3 when trying to read nand

 

[part-timer]

does E and F points need to be high to read nand or is that just for RGH chip?

 

[unkn0wn.92]

man get another cheap usb card reader its not the qsb or soldering

 

[part-timer]

Able to read nand now. In tut it says there shouldn't be any errors when comparing in JRunner. I get this:

Corona 4GB Manually Selected
H:\
Reading from H:\ to G:\X-BOX Modding\Xbox 360\coolrunner xbox360\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
Done!
in 0:04 min:sec
H:\
Reading from H:\ to G:\X-BOX Modding\Xbox 360\coolrunner xbox360\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Corona 4GB
RGH2 Selected
Nand Initialization Finished
Done!
in 0:04 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same


But because it says Nands are the same is this ok?

 

[nofeloniesyet]

Able to read nand now. In tut it says there shouldn't be any errors when comparing in JRunner. I get this:

Corona 4GB Manually Selected
H:\
Reading from H:\ to G:\X-BOX Modding\Xbox 360\coolrunner xbox360\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
Done!
in 0:04 min:sec
H:\
Reading from H:\ to G:\X-BOX Modding\Xbox 360\coolrunner xbox360\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Corona 4GB
RGH2 Selected
Nand Initialization Finished
Done!
in 0:04 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same


But because it says Nands are the same is this ok?

totally normal on 4gb ronas.notice it says they match?

 

[part-timer]

is it ok to re-read the nand after installing the Slim Post QSB V3 CPU_RST board?

 

[unkn0wn.92]

is it ok to re-read the nand after installing the Slim Post QSB V3 CPU_RST board?

why you would read again since you already dumped the nand ?

 

[part-timer]

I'm installing the LTU2 board. So I updated the dashboard to the latest 16547 then started to install RGH and realized when I read the original nand it was dashboard 16203. I forgot to re-read nand with 16547 before installing the QSB.

 

[part-timer]

or will the CB still be the same and it doesn't matter when i return it to stock 16203

 

[unkn0wn.92]

or will the CB still be the same and it doesn't matter when i return it to stock 16203

LDV will go up every dash update so read it again and save the new dump