Problem trying to flash to stock

[kapil888]

Hi, I recently tried to flash back to a stock nand from my RGH nand. I went to J- runner and made a stock, retail nand using my CPU key and all of that good stuff. I flashed via raw flash and nandflash.bin. It successfully wrote the image and I shut down. Now, the green glitch light wont come on and the console gives 3 red rings.

I didnt switch the cool runner to PRG yet. Is that the reason? I have all the files (original nand, cpu key, original ecc image.)

Thank you for the help
~Kapil:biggrin:

EDIT: the rrod comes after about 30 seconds of start up. I doubt it is a GPU issue because I started the console just fine 10 seconds before I switched to stock.

 

[Acton1]

yes mate switch coolrunner to prg

 

[Martin C]

Why did you create a new retail image? You only need to flash the stock NAND back.

EDIT: Remember now that you are looking to use a 14719 retail. In which case, set to PRG as stated.

 

[juanbrnt]

Hi, I recently tried to flash back to a stock nand from my RGH nand. I went to J- runner and made a stock, retail nand using my CPU key and all of that good stuff. I flashed via raw flash and nandflash.bin. It successfully wrote the image and I shut down. Now, the green glitch light wont come on and the console gives 3 red rings.

I didnt switch the cool runner to PRG yet. Is that the reason? I have all the files (original nand, cpu key, original ecc image.)

Thank you for the help
~Kapil:biggrin:

EDIT: the rrod comes after about 30 seconds of start up. I doubt it is a GPU issue because I started the console just fine 10 seconds before I switched to stock.

what you did its fine but you always have to switch to prg when you are write the nand or read the nand just alil step u forgot

 

[kapil888]

I switched it to PRG and I still got 3 rrod.
Edit: The fans still rev up like its trying to glitch.

 

[kapil888]

Should I reflash the retail nand via jtag tool and opening the console up or the original nand that i dumped when I first did the RGH?

 

[xblextreme]

When you first did your rgh and made a back up of your original nand use that one and not the retail image you created if you have not all ready tried that.

---------- Post added at 19:21 ---------- Previous post was at 19:18 ----------

And try writing back image with nandpro v3.

 

[kapil888]

When you first did your rgh and made a back up of your original nand use that one and not the retail image you created if you have not all ready tried that.

---------- Post added at 19:21 ---------- Previous post was at 19:18 ----------

And try writing back image with nandpro v3.

Thanks. I will try that tomorrow and report back :biggrin:
the command is : nandpro usb: -w64 nand.bin correct?

Can I also use J-runner for simplicities sake?

 

[Netkar]

Motherboard version?
Sure you can use the program that you want.

 

[Mickey3177]

Why did you start another thread on your same subject, keep everthing in one thread

 

[kapil888]

Got it up and running again using J-Runner and my original NAND.

One last question: Can I accept an official Microsoft Update from Live without my console getting RROD? Just wanted to make sure.

Thanks! ~Kapil

 

[Acton1]

yes mate it will be ok but there's no going back till RGH 2

 

[kapil888]

yes mate it will be ok but there's no going back till RGH 2

Thanks so much. You guys have been a great help

 

[Boogyman]

Hmm guess it pays to be a VIP member, my thread was closed for trying to get this same information.

Can you PM me the steps you took to get your retail image back on your Xbox 360?

 

[Martin C]

Hmm guess it pays to be a VIP member, my thread was closed for trying to get this same information.

Can you PM me the steps you took to get your retail image back on your Xbox 360?

You weren't asking that at all. You asked how to turn off the Coolrunner.

If you wanted to know how to flash back to stock, then you should have asked. If you don't understand any of this (and judging by your posts up to now, you don't), you should be reading up on the process. Again, as per the rules you agreed to however you don't seem to be doing this.

 

[Boogyman]

Thanks for the help kapil888!!! I got it up and running now! :biggrin::biggrin::biggrin:

 

[xblextreme]

Glad you got it too boot nobody likes RROD!