Problem When I write Nand

[BarBel]

Hi everyone... :smile:

I start to work on corona as 4gb console cuz there was no HD inside it, then I realized it's not 4gb...
So I finished read nand, boot to xell and get the CPU key...

Sadly I decided to remove the 4gb nand reader ( I hope I didn't remove it :crazy: ) Just before I wirte the hacked nand... I found one of the 4g metal is removed, I tried to fix it.. I don't know if I did that right way... Pic Uploded

Now When I write Nand it give me write error on block 0x01, 0x02, 0x03 ......... a lot of errors...

my Question is the problem from that missing metal or trace ? And is there other way or alternative points to write nand ...

-I have 100% Nand and CPU key..
-Console work fine and keep boot to xell..
-Motherboard is Corona V1..
PIC is here :
http://postimg.org/image/3t2z5vakb/

Please Help me.. Thanks a lot in Advance..

 

[Nintendo]

Hi everyone... :smile:

I start to work on corona as 4gb console cuz there was no HD inside it, then I realized it's not 4gb...
So I finished read nand, boot to xell and get the CPU key...

Sadly I decided to remove the 4gb nand reader ( I hope I didn't remove it :crazy: ) Just before I wirte the hacked nand... I found one of the 4g metal is removed, I tried to fix it.. I don't know if I did that right way... Pic Uploded

Now When I write Nand it give me write error on block 0x01, 0x02, 0x03 ......... a lot of errors...

my Question is the problem from that missing metal or trace ? And is there other way or alternative points to write nand ...

-I have 100% Nand and CPU key..
-Console work fine and keep boot to xell..
-Motherboard is Corona V1..
PIC is here :
http://postimg.org/image/3t2z5vakb/

Please Help me.. Thanks a lot in Advance..

Then flash your nand using an USB stick and RAWFlash

 

[Legendkillller]

Why would you remove it if you weren't done with the console ?

If the pad is missing from the nand reader, get a new one, if you plan on doing more than one console then solder wires to them so you don't lift more pads. If you lifted the pad from the console itself, it will need a repair, which may be too advance of a repair for you.

 

[Dadko]

I am not sure if I understand.
You soldered 4gb reader to corona v1. Then you realised it's corona v1 with 16mb nand, so you used jrp, right?
You decided to remove 4gb reader and now you can't write nand with jrp. Am I right?
Is your console booting? Post pictures of your jrp soldering.