RGH Problem with Jasper 16MB v4 CB 6750

M

markata

Noob Account
Nov 30, 2011
5
0
[SOLVED] Problem with Jasper 16MB v4 CB 6750

Hello all,

i did something wrong with my RGH method.

I used this tutorial http://www.team-xecuter.com/forums/showthread.php?t=75945.

After I flashed my coolrunner successfully i put it from PROGRAM mode to NORMAL as it was all powered and connected as shown here


( LATER I read that will turn it to normal a little bit later not now ).
After this I read 2 times my NAND with no bad sectors, compared them OK.
SO no big deal here, then i create.ecc file.

AND when it was time to "write .ecc" I got all the nasty LOG:

NandPro v3.0a by Tiros

Looking for usb interface device
Flash Config: 0x00023010
Block Size: 16KB Block Limits: 0x000000..0x0003FF
File: ResetGlitch.ecc
Opt: Spare data will be initialized
Opt: Block markers will be initialized
Opt: Ecc will be re-calculated
usb_bulk_write failed -5
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
usb_bulk_write failed -116
Click to expand...
:crazy: CRAZY WORK :crazy: :eek2: :facepalm:

TURNED OFF EVERYTHING, TRIED TO HOOK IT TO TV, and everything stood to BLACK SCREEN...

Can this program to normal button messed the work and where I could start from ?
 
Last edited:
S

slipcky6

VIP Member
Apr 5, 2009
155
0
Home
I had the same thing happen to me, i tried a different computer and that helped. What kind of computer is it?
 
M

markata

Noob Account
Nov 30, 2011
5
0
slipcky6 said:
I had the same thing happen to me, i tried a different computer and that helped. What kind of computer is it?
Click to expand...
Lenovo Laptop , win7 x64-bit

Did I screwed something when i press NormaL Mode for CoolRunner earlier ??? I think no ?

I need now again to create .ecc and write it successfully write anyhow, right ???
 
S

slipcky6

VIP Member
Apr 5, 2009
155
0
Home
Okay deff try a new usb port.
No aslong as you programed it on PRG and then switched to normal you should be fine.
Also did you leave the Coolrunner program cable plugged in when you tried to write the ecc?
 
M

markata

Noob Account
Nov 30, 2011
5
0
slipcky6 said:
Okay deff try a new usb port.
No aslong as you programed it on PRG and then switched to normal you should be fine.
Also did you leave the Coolrunner program cable plugged in when you tried to write the ecc?
Click to expand...
Yes, all cables were hooked as in the tutorial stated. I pressed Normal Mode earlier, then successfully download nands with no bad sectors fast. Created ecc file again fast and with no problems from my nand... and the only thing was to write ecc file & remove all cables .... but this nasty Debug Log... stopped my progress :crazy:

edit: will try diff USB, PC .. for SURE
 
S

slipcky6

VIP Member
Apr 5, 2009
155
0
Home
yes try a different computer and when writing ecc just make sure on the nandx only the cable to the xbox 360 is connected.
 
M

markata

Noob Account
Nov 30, 2011
5
0
slipcky6 said:
yes try a different computer and when writing ecc just make sure on the nandx only the cable to the xbox 360 is connected.
Click to expand...
:D:rolleyes2: THANK YOU VERY MUCH !

That worked out man ! Used the original nand from yesterday, cause after this was modified somehow ,did the steps again.... with only jtag cables nothing more :tongue::cool2: AND NEW PC :wink:
 
You must log in or register to reply here.