problem with RGH

[melo88]

RGH was doing good I got the nand with 2.5 Autogg
nands all right out and says it compares the Xell think and write in the console, install the CoolRunner and then turn me loose and two glitcheos and off the console ... putting on the central red LED ... I'm surprised and Nose say ... uninstall the entire wiring and all CoolRunner
I put original nand and so, I deleted it several times and finally I can see the logo but it comes off the console ... anyone knows that could be happening?

say this is an xbox slim, trinity plate 16 mb and use to write the matrix usb programer
The console was when he came in 14699

regards

I leave a nand rise for those who want to see
http://www.fileserve.com/file/wtvwvxj/nanddump.bin


i use the traductor , the english is not perfect

 

[seanr28]

sorry dont quite understand, do you actually get xell to boot and display cpu key?

use multibuilder 0.5 to build the ecc file and your freeboot image once you have your cpu key.

 

[melo88]

I make the ecc with ecc glitch generator
But if put this when power on the console appear the led red,

The nand upload is all correct?

 

[Martin C]

Check the soldering on STBY_CLK (point B on Coolrunner).

 

[melo88]

now the coolrunner is not installed, i try to write de original nand and put on the console

 

[Martin C]

So you only need to write back the area taken up from the ECC/XeLL.

nandpro usb: -w16 nand.bin 0 50.

 

[melo88]

if the consola only write 0 50 blocks can get the dashboard original?

can check if the nand get it is correct?

http://www.fileserve.com/file/wtvwvxj/nanddump.bin

 

[Martin C]

If you only flashed ECC to it, yes.

Otherwise overwrite the entire NAND.

 

[melo88]

i put this

nandpro usb: -e16 0x000000

and later put this to write the original nand

nandpro usb: -w16 nand.bin

and the error is the same appear led green and later put led red the console

 

[Martin C]

Check CPU_RST point.