RGH Problem with xbox and Jr programmer

Legendkillller

Full Member
Aug 29, 2014
46
8
So after finishing my first successful rgh I decided to do my other console but I ran into a problem:

- Soldered direct NAND wires
- 4 dumps on first try
- Soldered cr3 lite
- Tried to write ecc got loads of errors
- Re-soldered over and over again
- Unhooked everything, console won't boot, just beeps
- Checked for lifted pads, none.

So what's going on ? Is it not booting because I got the errors while writing the ECC ? The RB315 pad seems fine from what I can tell.

Need some assistance because the NAND points can't take much more resoldering.

Will post pics if needed. Thanks
 

Krafter

VIP Member
Apr 17, 2011
3,737
118
Indiana
So what's going on ? Is it not booting because I got the errors while writing the ECC ?
This is kind of like asking, did my cookies not turn out because I didn't add eggs? Your NAND needs eggs to boot lol. Errors during a write means something didn't get written. Post pics and your JR log.
 
Last edited:

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
could you please post your jrunner log? what happens if you try to read the nand?

you say "Need some assistance because the NAND points can't take much more resoldering.", heres a tip for you: dont desolder those wires untill youre done!
 

Legendkillller

Full Member
Aug 29, 2014
46
8
Trinity Manually Selected
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 00
Wrong Version.
Version: 01
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Reading Nand
Done!
in 5:20 min:sec


Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Reading Nand
Glitch2 Selected
Nand Initialization Finished
Done!
in 5:26 min:sec


Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump3.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 6:03 min:sec


Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump4.bin
Comparing...
Reading Nand
Nands are the same
Done!
in 5:29 min:sec


Comparing...
Nands are the same
Programming Coolrunner
C:\Users\Adrees\Desktop\XBOX360\J-Runner v3 (5) Core Pack\common\xsvf\trinity.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Users\Adrees\Desktop\XBOX360\J-Runner v3 (5) Core Pack\common\xsvf\trinity.xsvf
Sending Out Packets .........
Success
Could not find a part of the path.


No internet connection found (RasInstalled), so can't check integrity of files. Use at your own risk
===================================================
Saturday, 10 January 2015 6:53:26 PM


J-Runner v0.3 Beta (7) Started




It's advised to run in administrator mode on Windows 8
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
ECC created
Version: 01
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
IoTimedOut
Error: 621 writing block 1
IoTimedOut
Error: 621 writing block 2
IoTimedOut
IoTimedOut
IoTimedOut
Error: 621 writing block 5
IoTimedOut
Error: 621 writing block 6
IoTimedOut
Error: 623 writing block 7
IoTimedOut
Win32Error
Failed to write 0x9 block
Failed to write 0xA block
Failed to write 0xB block
Failed to write 0xC block
Failed to write 0xD block
Failed to write 0xE block
Failed to write 0xF block
Failed to write 0x10 block
Failed to write 0x11 block
Failed to write 0x12 block
Failed to write 0x13 block
Failed to write 0x14 block
Failed to write 0x15 block
Failed to write 0x16 block
Failed to write 0x17 block
Failed to write 0x18 block
Failed to write 0x19 block
Failed to write 0x1A block
Failed to write 0x1B block
Failed to write 0x1C block
Failed to write 0x1D block
Failed to write 0x1E block
Failed to write 0x1F block
Failed to write 0x20 block
Failed to write 0x21 block
Failed to write 0x22 block
Failed to write 0x23 block
Failed to write 0x24 block
Failed to write 0x25 block
Failed to write 0x26 block
Failed to write 0x27 block
Failed to write 0x28 block
Failed to write 0x29 block
Failed to write 0x2A block
Failed to write 0x2B block
Failed to write 0x2C block
Failed to write 0x2D block
Failed to write 0x2E block
Failed to write 0x2F block
Failed to write 0x30 block
Failed to write 0x31 block
Failed to write 0x32 block
Failed to write 0x33 block
Failed to write 0x34 block
Failed to write 0x35 block
Failed to write 0x36 block
Failed to write 0x37 block
Failed to write 0x38 block
Failed to write 0x39 block
Failed to write 0x3A block
Failed to write 0x3B block
Failed to write 0x3C block
Failed to write 0x3D block
Failed to write 0x3E block
Failed to write 0x3F block
Failed to write 0x40 block
Failed to write 0x41 block
Failed to write 0x42 block
Failed to write 0x43 block
Failed to write 0x44 block
Failed to write 0x45 block
Failed to write 0x46 block
Failed to write 0x47 block
Failed to write 0x48 block
Failed to write 0x49 block
Failed to write 0x4A block
Failed to write 0x4B block
Failed to write 0x4C block
Failed to write 0x4D block
Failed to write 0x4E block
Failed to write 0x4F block
Done!
in 0:20 min:sec






Once i couldnt get the ecc on I wanted to see if i could at least dump nand still even though i already had mine .... Just to see if there was also a ready problem ... got the following errors:


Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 00
Wrong Version.
Trinity Manually Selected
Version: 01
Flash Config: 0x00023010
IoTimedOut


IoTimedOut:No more bytes!
00023010
Trinity, Jasper 16MB
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Wrong Version.
Version: 01
Flash Config: 0x00023010
IoTimedOut


IoTimedOut:No more bytes!
00023010
Trinity, Jasper 16MB
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Wrong Version.
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 00
Wrong Version.
Version: 01
Flash Config: 0x00023010
IoTimedOut


IoTimedOut:No more bytes!
00023010
Trinity, Jasper 16MB
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Wrong Version.
Version: 01
Flash Config: 0x00023010
Error: 210 reading block 0
IoTimedOut


IoTimedOut:No more bytes!
00023010
Trinity, Jasper 16MB
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Wrong Version.
Version: 01
Flash Config: 0x00023010
IoTimedOut


IoTimedOut:No more bytes!
00023010
Trinity, Jasper 16MB
Reading Nand to C:\Users\Adrees\AppData\Local\Temp\jwuaniin.tmp\output\nanddump1.bin
Wrong Version.
Version: 01
Flash Config: 0x00023010
IoTimedOut
 

Legendkillller

Full Member
Aug 29, 2014
46
8
Can you post the rest of the install images



I posted 4 pics above ? :( Ive disconnected the coolrunner so there isnt much else there but i can add more if it will help me out.... Just to add, the coolrunner would still light up as red when connected..


Any suggestions so far ?
 

Legendkillller

Full Member
Aug 29, 2014
46
8
Okay so now im getting different errors while trying to read the nand "0x000000000". Usually the jr programmer will slightly blink when its plugged into the xbox but no usb and thats an indication to me theres at least power flowing or slodering is good but now the board is unresponsive.

Ive tried:
- Resoldering
- Trimming/tinning wires
- Different computer
- Reprogramming jr
- Cleaning off points and flux
- Checking for bridges
- Cleaning out solder points with wick and solder sucker and flowing new solder


Heres some more pics of my current connections as of right now:




[img=http://s11.postimg.org/z3ar6hzf3/IMG_2253.jpg]


Im no expert but thats the best i can do... I did some searches and found that certain points need to be bridged in this situation to get read/write. Can someone confirm this ?