Problems connecting to xbox

J

jrsyjo

Noob Account
Jan 8, 2004
2
0
Everything has gone well up to the point of connecting my pc to my xbox.
-I've flashed the x3 - no problems
-I booted up a copy of evox with no problems
- 2nd nic is set to the following:
IP address 192.168.0.1
subnet mask 255.255.255.0
default gateway 192.168.0.1 (i've tried with and blank)

under settings for the evox dashboard:
IP address 192.168.100.10
subnet mask 255.255.255.0
default gateway 192.168.100.1

in flash fxp I entered the address for evox of 192.168.100.10
username xbox
password xbox
I am using a crossover cable (i was able to flash via http with no problems)

I just have not had any luck with flashfxp connecting to my xbox. I have tried different setting to no avail. I've read several posts and tutorials and feel I've done everything instructed.
Any help would be appreciated
Thanks in advance
jrsyjo
 
J

j0siah

VIP Member
Jan 22, 2004
211
0
You're not in the same subnet.

255.255.255.0 as a subnet mask says that the first 3 ordinals have to match to be seen. IE) 192.168.0 does not equal 192.168.100

So you have 3 choices.
(only need to do one of the following)

1) Set the 2nd Nic to 192.168.100.11
2) Set the Xbox to 192.168.0.10
3) Set the subnet Mask on BOTH to 255.255.0.0
 
J

j0siah

VIP Member
Jan 22, 2004
211
0
Why did I make it complicated?
I'm assuming this was a "beat you to the posting" issue.

I was just trying to explain WHY the two couldn't see each other.
 
J

jrsyjo

Noob Account
Jan 8, 2004
2
0
Bingo!!
That was beautiful!!
Thanks for the quick response. I really hesitated before asking but am glad I did!
jrsyjo
 
You must log in or register to reply here.