Once I enable my X3 chip it come up fine, (blue symbol) but i cant switch back to my Microsoft bios. Just resoldered my DO. Anything else it could be???
Skeet :evil:
Skeet :evil:
Problems on switching between bios
- Thread starter skeetfreak32
- Start date
to boot into the ms bios (the only reason to do so would be for xbox live) you just hold the power button in thill the x3 led turns red
i'm having a similar problem.. i can boot to my ms bios (chip disabled) my modchips first bios (chip enabled), but when i try to boot the back up bios (purple light by pressing power and eject together) it goes pruple then blue and boots the what lloks like the first bios....
Can someone help???
Ok whatever info you guys need let me know.
I have Modded 4 360s no problem Hitachis and 1 samsung. Now with my Liteon Ive run into major problems. I bought the CK3 Lite and didnt notice I didnt have a serial port on my New custom built PC so I bought a Serial to USB connection.
Well I was in process and for some reason at the beginning it wouldnt give me the key so I couldnt get it flashed and now my drive is either bricked or locked. It wont eject and jungleflasher wont see the drive. Its Un-Determined.
Any suggestions or advice?
Ok whatever info you guys need let me know.
I have Modded 4 360s no problem Hitachis and 1 samsung. Now with my Liteon Ive run into major problems. I bought the CK3 Lite and didnt notice I didnt have a serial port on my New custom built PC so I bought a Serial to USB connection.
Well I was in process and for some reason at the beginning it wouldnt give me the key so I couldnt get it flashed and now my drive is either bricked or locked. It wont eject and jungleflasher wont see the drive. Its Un-Determined.
Any suggestions or advice?
Re: Can someone help???
it's not brick, sounds like you did the liteon erase and erased the firmware from the drive. if that is what you did your screwed.....
if the firmware was erased the drive won't eject.
and it won't identify the drive because the firmware is blank so theres nothing to identify.
if you connect the drive and hit the intro/device button then follow the popups it will recognize the chipset in the drive, but without the dvdkey your still screwed.
it's not brick, sounds like you did the liteon erase and erased the firmware from the drive. if that is what you did your screwed.....
if the firmware was erased the drive won't eject.
and it won't identify the drive because the firmware is blank so theres nothing to identify.
if you connect the drive and hit the intro/device button then follow the popups it will recognize the chipset in the drive, but without the dvdkey your still screwed.
Re: Can someone help???
But I didnt even get that far to do the erase. I got the serial error when I started. Thats as far as I got.
But I didnt even get that far to do the erase. I got the serial error when I started. Thats as far as I got.
Re: Can someone help???
Did you read read the keys with the probe? If so then just load the Dummy int he target firmware and go back to mtk flash tab and it's either intro or outro, try both and see what happens. If you didnt even get the keys did you make sure you pushed the probe on r707 spot?
Did you read read the keys with the probe? If so then just load the Dummy int he target firmware and go back to mtk flash tab and it's either intro or outro, try both and see what happens. If you didnt even get the keys did you make sure you pushed the probe on r707 spot?