Problems with Corona v6 4GB (E model)

[Vampirtc]

I have tried CoolRunner C with oscil and CR3 Lite and DGX modified to RGX. At the moment I do not have CR3 Pro. I tried several Postout adapters.
This is not the first v6 I have done, and it is the only one I can't do.

Whats special about this one is that the first glitch seems normal, but all other glitches are "loud", you can hear the oscilator at every glitch. With other v6 Corons Coolrunner is silent.

I also tried alt ECC, for the RGX one the first glitch is loud but on the second glitch it crashes (oscilator keeps making loud noice).

http://shrani.si/f/2c/Vn/1Wrj4RyM/img2710.jpg

- - - Updated - - -

PS: Also tried alternative CPU RST point and different cable leghts.

 

[AllyNerd]

i would go with cr3 lite and wire that up and then complete the template for help. u sure you got a good read of your nand those wires look kinda long should have just soldered in the qsb

 

[nofeloniesyet]

looks pretty messy,could be pics but i swear i see solder bridging pads together.

 

[playingmax]

yeah, work looks very messy. get urslef the slim proto alot cheaper then the pro. n will have ur console booting under 15secs.
http://team-xecuter.com/forums/showthread.php/139339-Corona-v6-1-3-Cycles

 

[Vampirtc]

I know it a mess because I've been trying every combination. I can do it clean and post pictures, but I'm 99% certain this is not it. I thinks its ECC or something specific. I really do those every day...

 

[Vampirtc]

 

[Vampirtc]

This is better soldering, no change.

 

[Vampirtc]

Initializing nanddump1.bin..
Corona 4GB
Retail Selected
Nand Initialization Finished
RGH2 Selected
ECC created
Writing to F:\ from D:\******\J-Runner\output\image_00000000.ecc
Done!
in 0:00:672 min:sec:ms
ECC created

 

[AllyNerd]

your creating an ecc. what is your current dash?

 

[BrockThunderjam]

your creating an ecc. what is your current dash?

You still can create ecc with current dash versions. Doing it this way (as oppose to using the prebuilt only) is actually better in some ways as it will show your actual DVD key. I assume that's where you were going with that?

 

[AllyNerd]

You still can create ecc with current dash versions. Doing it this way (as oppose to using the prebuilt only) is actually better in some ways as it will show your actual DVD key. I assume that's where you were going with that?

the create ecc button used to be greyed out when it detected a dash of 14719 (or 14717) and up. How can you now create ecc's? Wasn't that the whole point of the dgx release and since the leaked bootloaders came out then you could use precompiled ecc's for those higher dashes without the need for the "double" glitch

 

[BrockThunderjam]

The precompiled did not contain the correct kv info to display yoru console's dvd key. The cpu key was obviously correct, but the dvd was a place holder. When you now create your ecc it injects the correct info from you actual nand read into the ecc. At least that's my understanding.

 

[AllyNerd]

The precompiled did not contain the correct kv info to display yoru console's dvd key. The cpu key was obviously correct, but the dvd was a place holder. When you now create your ecc it injects the correct info from you actual nand read into the ecc. At least that's my understanding.

I'll take your word and look into that. I honestly only create ecc's for rgh1 on phats. Everything else cpu key to decrypt keyvault. Thanks for the info though. Dude is the man on your profile pic lol

 

[BrockThunderjam]

I'll take your word and look into that. I honestly only create ecc's for rgh1 on phats. Everything else cpu key to decrypt keyvault. Thanks for the info though. Dude is the man on your profile pic lol

Ashley Shaffer BMW! Wooh!

 

[XDK]

I'll take your word and look into that. I honestly only create ecc's for rgh1 on phats. Everything else cpu key to decrypt keyvault. Thanks for the info though. Dude is the man on your profile pic lol

Brock is correct

the first precompiled ecc images for 14717 + dashboard key recovery have their own kv already preinjected into them when you loaded up xell your cpukey would show but your dvd key wouldnt because the cpukey off your motherboard would not decrypt the dvd key from the keyvault that came in those ecc images.. hence the failure to decrypt dvd key message in xell.

 

[dexxxterek]

I have the same problem. I tried Cr3 Lite and RGX. Console glitch 5 times, then it stops and keep oscillator sound. I tried every combination of cable lenght, timing file alb switch S2. My console is corona v6, SK Hynix nand, MFR date 2013-08-03. I will post pics tomorrow, but i will be glad if someone give me any advice.

 

[Martin C]

I have the same problem. I tried Cr3 Lite and RGX. Console glitch 5 times, then it stops and keep oscillator sound. I tried every combination of cable lenght, timing file alb switch S2. My console is corona v6, SK Hynix nand, MFR date 2013-08-03. I will post pics tomorrow, but i will be glad if someone give me any advice.

Start your own thread complete with pics and logs.

 

[marvel-xxl]

Today I have same problem! Do before this more than 10 X360.E 4Gb (MFR date 2013-05-XX) and all is good. But now I have 3 X360.E with same MFR date - 2013.08.11 and same problem. Glitch good but! only before 7 blink(cycles) (all three consoles behave in exactly the same). If the console starts to 7th blinking all is normal, but after the 7th console freezes (stuck, no boot). Only helps reconnect power. Сhips (rev.C, Lite and other) are different, too, tried different points, but the problem is one and the same

 

[ArturSTR]

same problem with consoles with MFR date - 2013.08..... They are somewhat different

 

[marvel-xxl]

at the moment there is no other that would compare