Problems with Corona v6 4GB (E model)
- Thread starter Vampirtc
- Start date
There is problem only with 4gb corona v6 with SK Hynix Nand.
Wysłane z mojego GT-N7100 przy użyciu Tapatalk
Wysłane z mojego GT-N7100 przy użyciu Tapatalk
Got one mfg date 2013-08-12 sk hynix eMMC nand, cr 3 lite glitches once then stuck. out of maybe 10 tries it boots at first glitch, and sometimes very rarely it does not get stuck and will try glitching for 8-10 times then it boots. But most of the time it stops after one glitch i it boots all fine, if not then power out, retry. I'll try the slim proto soon with this though. EDIT: with slim proto it behaves much better, boot rate is OK'ish. Sometimes needs a reboot is all.
However I have seen some machines mfg date 2013-04-xx with sk hynix eMMC nand (corona v6 4gb is what we are talking about) and they all seem to be working fine. What could be the difference?
However I have seen some machines mfg date 2013-04-xx with sk hynix eMMC nand (corona v6 4gb is what we are talking about) and they all seem to be working fine. What could be the difference?
Last edited:
comcraft
Junior Member
Having exactly same issue as posters above. Sometime i get glitch, most time only long sound of FAN (people, its not oscillator... its fan, please remember that). Cant restart console, only pull cable. Used different wire lenghts, tryed CR3 Lite, CR Proto. I am out of ideas...
Corona V6 with Hynix eMMC NAND.
Corona V6 with Hynix eMMC NAND.
Martin C
VIP Member
If you want help, post pics and logs as per the template. Next person who posts in here asking for help without submitting a help topic first will get an infraction.
comcraft
Junior Member
exactly ^^ nofelonies and I were one of the first few with a v6 corona rgh'd and I never had any issues outta mine before i sold it and nor does the current owner have any issues then again we used legitimate chips
I made a few of v6, problem is only with consoles manufactured on August 2013 or earliier
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
Kalisz.
The "non glitchable" Coronas are in every Tesco. There is no problem with v5
Wysłane z mojego GT-N7100 przy użyciu Tapatalka
Hello. I have tried "Advanced - Create an image without nandump.bin" and everything works perfectly. Earlier I had the same problem - after 2 cycles corona V6 stop glitch and make constant noise of fan. My friend found how to solve this problem (he has just edit something in glitch image with winhex. but did not tell me what ) My another friends made idea "Create an image without nandump.bin" and it works for me. Please try this method and post about your results.
P.s. I had glitch image made my friend with method by winhex. but i can"t see what actually was edited. if you are interested - you can see all my files (original dump, my first glitch image which did not work (fributsverchit.bin) and edited by winhex which works too (fributnormalzapusk.bin) and kv_info) http://yadi.sk/d/2qFHKGaQDNFHW
P.P.S. Corona V6 mfr-date 08-04-13
) My another friends made idea "Create an image without nandump.bin" and it works for me. Please try this method and post about your results.P.s. I had glitch image made my friend with method by winhex. but i can"t see what actually was edited. if you are interested - you can see all my files (original dump, my first glitch image which did not work (fributsverchit.bin) and edited by winhex which works too (fributnormalzapusk.bin) and kv_info) http://yadi.sk/d/2qFHKGaQDNFHW
P.P.S. Corona V6 mfr-date 08-04-13
It seems someone in Ukraine knows how to fix it...
Challenge accepted :cool2:
I'll try to find the solution even without Xbox (as always)
If you have some high-quality photos of the whole X360E motherboard (problem and good ones!), please send me.
See you later ^_^
P.S. For everyone: the problem is exist. It isn't related to bad wiring or fake CRs. Something new was added [or removed] in august coronas.
Challenge accepted :cool2:
I'll try to find the solution
even without Xbox (as always)If you have some high-quality photos of the whole X360E motherboard (problem and good ones!), please send me.
See you later ^_^
P.S. For everyone: the problem is exist. It isn't related to bad wiring or fake CRs. Something new was added [or removed] in august coronas.
120 ohm resistor on E & F point is the solutions for this issue on CORONA V4 & V5 & V6
For this manufactured V6 the problem is other....
Thanks for the great contribution, and save the image file, it seems to be back to the good old days when this forum was full of tips and ideas (now a little less .. but very noob with problems photocopy ..)
For this manufactured V6 the problem is other....
Thanks for the great contribution, and save the image file, it seems to be back to the good old days when this forum was full of tips and ideas (now a little less .. but very noob with problems photocopy ..)
Last edited:
Amazing! I will try this soon. Those russians / ukrainians are again at it - with some good tracing work the solution is found
After all there were reports on this forum about someone replacing the skhynix emmc with other chips and the trying to rebuild it as 16mb corona, same results - so it was not the skhynix emmc after all byt the sb chip sending a reset pulse to the emmc after recignizing something went "bad" (well rgh went bad lol)
After all there were reports on this forum about someone replacing the skhynix emmc with other chips and the trying to rebuild it as 16mb corona, same results - so it was not the skhynix emmc after all
byt the sb chip sending a reset pulse to the emmc after recignizing something went "bad" (well rgh went bad lol)