Hi,
I have read the tutorial several times, But i seem to keep getting stuck at the same point all the time.
I am booting into dos using NTFSDos (as cannot boot from usb
)
I have a MS28 and using a Via 6421a sata pci card (think it might be a raid one if that any help as says that on iprep), and followed the tutorial all the way.
When I get into dos, I go into the IPrep folder, then hook up the sata cable. then type IDump then serial number.
Comes up with the drives, option 3 for xtreme pri master. Before pressing that option I turn off the 360, I then press the option 3 for xtreme pri master, comes up with port 7000 master slave a0. Does not come up with fail like says in tutorial.
If i wait the 10 seconds, and turn on my 360, comes up reading ....01%, and then invalid opcode at 2110 2020 0046 0000 0000 0060 FFFF 0000 0000 0000 0001 0022 4320
and then still
invalid opcode at 7570 0070 0247 1334 FFFF 0400 0400 00D0 0070 08C4 1B56 7520 0070.
And then It stops? I have tried turning off my 360 and back on ass it says somewhere that you have to keep trying to reboot the 360 untill it does dump the firmware.
Where am I going wrong? Am i supposed to reboot the pc evertime that need to try and dump the firmware? at start from scracth? Or is there an easy way that saves me doing this.
Everytime that keeps only going to 1% I have to go into windows, and delete the backups folder as It wont allow me to dump it again untill this has been done. can I do this from dos somehow?
It is really really staring to bug me, and starting to lose all my hair!
Please help me
Bob
***Edit:- In tutorial it says
" If you get errors like Directory already exists or mkdir failed, dont worry. The batch file is trying to create a new folder but its already there."
But It doesnt say how to solve this problem? It just carrys on from there****
I have read the tutorial several times, But i seem to keep getting stuck at the same point all the time.
I am booting into dos using NTFSDos (as cannot boot from usb
)I have a MS28 and using a Via 6421a sata pci card (think it might be a raid one if that any help as says that on iprep), and followed the tutorial all the way.
When I get into dos, I go into the IPrep folder, then hook up the sata cable. then type IDump then serial number.
Comes up with the drives, option 3 for xtreme pri master. Before pressing that option I turn off the 360, I then press the option 3 for xtreme pri master, comes up with port 7000 master slave a0. Does not come up with fail like says in tutorial.
If i wait the 10 seconds, and turn on my 360, comes up reading ....01%, and then invalid opcode at 2110 2020 0046 0000 0000 0060 FFFF 0000 0000 0000 0001 0022 4320
and then still
invalid opcode at 7570 0070 0247 1334 FFFF 0400 0400 00D0 0070 08C4 1B56 7520 0070.
And then It stops? I have tried turning off my 360 and back on ass it says somewhere that you have to keep trying to reboot the 360 untill it does dump the firmware.
Where am I going wrong? Am i supposed to reboot the pc evertime that need to try and dump the firmware? at start from scracth? Or is there an easy way that saves me doing this.
Everytime that keeps only going to 1% I have to go into windows, and delete the backups folder as It wont allow me to dump it again untill this has been done. can I do this from dos somehow?
It is really really staring to bug me, and starting to lose all my hair!
Please help me
Bob
***Edit:- In tutorial it says
" If you get errors like Directory already exists or mkdir failed, dont worry. The batch file is trying to create a new folder but its already there."
But It doesnt say how to solve this problem? It just carrys on from there****