LITEON DG-16D4S - SLIM Problems with T-X replacement PCB

[fandangos]

Hi all,

I have a 0225 with 1.9 LT+. I locked it up and did everything fine just like the tutorial say.

Now I want to flash to 2.0.

I don't have a x360usb so in the past I did the usb adapter method to get my keys.

Since the T-X pcb is unlocked, do I need to do that method all over again?

I'm having problems sending the unlock command to my PCB.
I still have my keys files but I can't load them.
How do I unlock my pcb again?

By the way, I know about the switch and it's set to WP=1 (unlocked).

 

[titcave]

Did you tried the sata usb method ?

 

[BL4K3Y]

It is recommended to use the X360USB Pro with Slim drives, onboard and VIA chipsets are reported to have issues.

 

[fandangos]

The sata usb method is the method I want to avoid LOL.

 

[BL4K3Y]

Onboard and VIA chipsets are reported to have issues.

This is the problem you may face if you don't have one.

 

[titcave]

The sata usb method is the method I want to avoid LOL.

You'll need a x360usb if you don't want usb adapter method

 

[fandangos]

the usb adapter method is not working anymore, there's something wrong with the T-X PCB.

I still have my key files:

Dummy.bin
Identify.bin
Inquiry.bin
Key.bin
Serial.bin

 

[BL4K3Y]

I doubt that the PCB is at fault, get yourself an X360USB Pro and I am sure you will not have any further issues .

 

[fandangos]

Well..
I don't want to get a x360usb.
I want to flash my drive.

When I bought this pcb I though it was unlocked.

Why I can't unlock it now?