problems

[sheldo1]

not sure if this is a bug or not so didnt now where to post. i have recently installed the x3 after having the x2.3b pro and with the settings on the dashboard i am unable to change them as when i goto save the changes it comes up error 123. cud anybody point me in a direction to the answer????

 

[Telexen]

Looks like you're trying to use UnleashX ...

It was a known issue ... according to unleashx it's been fixed - but he's gearing up for a full blown release rather than just a quick fix for the problem between UnleashX and the X3.

So the next version of UnleashX will fix it. Until then you can either launch UnleashX from another dashboard (even from a dashboard selector should work) or throw the X2 or Evox M8 BIOS onto one of the banks you have left on yoru X3 and boot to it to run UnleashX

 

[chriseyj2002]

Help, After NANDPRO?

Hello everyone,

for who did use nandpro from LPT to xbox360 motherboardboard.

I did read the .bin file from motherboard twice, and i checked them using "hex editor neo" and they match, now i want to know where to found the Key so i can put it in my drive to make it work.

Thank you

 

[ReMix]

Re: Help, After NANDPRO?

you have to flash xell onto it and get the cpu keys so that you can decrypt your nand

 

[chriseyj2002]

Re: Help, After NANDPRO?

where to found xell?
and how can i get the cpu key after the flash? how to do the flash- using nandpro the command -w16?

Thank you

 

[chriseyj2002]

Re: Help, After NANDPRO?

ok i did found a tuto that explain everything
http://www.se7ensins.com/forums/modding-tutorials/164479-do-jtag-hack-dump-nand-xell.html
thanks

 

[chriseyj2002]

Re: Help, After NANDPRO?

Ok now when i want to open the nand file in Degraded v1.1 it won't opened.

I did edit the 2004-2007 to 2004-2005 and still nothing that give me an error message.

 

[chriseyj2002]

Re: Help, After NANDPRO?

Ok i was able to read it now using degraded, and that what i get.

CB Version 1923 ldv 0
CD Version 8453
CE Version 1888
CF(0) Version 7371 LDV 5
CF(1) Version 8955 LDV 6

I did found only this file xenon_1921_hack-20090911.rar
as i see it's only used for 1921

Is there anyway to hack this version.

Thanks

 

[chriseyj2002]

Re: Help, After NANDPRO?

I did some stuff that i regret.

I did write the xenon-hack.bin, when i want to poweron my xbox it's give me 3 red light.

When i write back the original nand.bin, the same thing 3 red light.

Please help me

 

[HHG]

Re: Help, After NANDPRO?

make sure you did not break off any resistors or surface mount capacitors. Make sure you did not accidentally screw with anything with the heat sinks.

It could also just be a coincidence. You may need to reflow the gpu.

 

[chriseyj2002]

Re: Help, After NANDPRO?

No that works, i did do the erase and write the original nand again and it's works, now how can i get the cpukey...

I saw that's impossible to do it since my kernel is 8955