Pull The Plug Trick! Via VIA VT6421 RAID and MS:28 Solution!

[pc69]

Hi Guys,

There some guys with timing issues with ms28 samsung drive...here is a 100% solution Trick..

A easy quick tutorial, We al know when we do Samread 1234567 12345 (example!) before u choose the drive u must wait 10 seconds trick... I Know WE must wait but it doesnt have to be 10 sec 5 sec is ok .... after that he is reading de ORIGINAL firmware but when he trying to create the Hacked firmware it freezes right!!! most of the people are trying for 20 times to get the job done... there is a easy way..

Ure DVD drive is causing the freeze u must shut off exactly ending reading the firmware...just pushing the power off button doesnt do the trick.. he need just 1 sec to create the hacked bin ..so to give that u need to do ...

1 Grab your Xbox 360 power Supliar..
2 When he Finishes reading the firmware (same line four times!) Pull the plug from ure xbox 360 supliar...
3 Remember.. exactly when he finishes reading the firmware pull out...and he will create the hacked bin....

i did this with tutorial of Textbook (greate guy) ..With NFTS cd trick (i dont have flop or usb so) and i have Via VIA VT6421A RAID...its not the update of ure chip or something..drive causes pause when he trying to create Hacked bin...i succesfully read the orig.bin..just enough time before freeze.. he needs 2 sec guys..so pull the power plug off...on TIME

my second ms 28 drive..im happy...so here i am to make u happy, hope this works for you too...u must know the exact timing try...ure reading ure firmware not flashing so work on ure timing and PULL or split cables from Power suplair (its easy to pul from adapter )..from there is easy to flash , just follow textbook tutorial wait 10 sec and flash..... it works greate...

Remember: Use at ure own risk..

succes all

 

[Textbook]

Re: Pull The Plug Trick! Via VIA VT6421 RAID and MS:28 Solut

Interesting...

But really, once you have your orig.bin, you're past a big stumbling block already. You could create the hacked.bin manually using the "Make Xtreme Firmware" , 360 Firmware Toolbox, or Samtool in Windows, then just put that in the /BACKUPS/<serial>/<serial>/ folder as hacked.bin to do the samhack.

Nevertheless, it may be quicker to just do a restart and pull the power cable then booting back into Windows.

I know some people were getting their orig.bin, but x360sam was failing, but no explanation for it until now.

 

[pc69]

Re: Pull The Plug Trick! Via VIA VT6421 RAID and MS:28 Solut

Greate man himself Hi Textbook,

Without ure explanation tutorial...not 2 easy ..Getting the original bin was not the problem....but i know how to manual creating the hacked bin... im learning MCSE..., but this one was really interesting when i set xbox 360 on and the PC i just freezes and not booting to dos menu!!!!...when i restart PC and leave the xbox 360 on, it boots to dos and i fallow ure tutorial...

it just freezing when i turn xbox 360 on after 10 secs for reading original bin (OK) just before create ...i think the cause is plugging ure xbox 360 drive on PC workaround, this he must boot once or he freezes...the Odd thing was he is just not freezing at Flashing ..(good thing do) the xbox 360 after turning over 10 secs! u just have 4 sec for reading and creating the hacked bin before he freezes and u need full 6 secs...for flashing the drive he is taking his full 6 secs...!!!!!!!!

he flashes perfectly....

And i fallow the rest of the tutorial..]]