LITEON DG-16D4S - SLIM Putting a drive key on to another liteon

[studiovpc]

considering you have RGH, you can put pretty much any slim drive in it, just use dummy.bin you have and you are rady to go... load dumy.bin as source and select lt+ 3.0 fw for it or another one, before you write the fw you enter vendor mode and ERASE the board, after that write the new fw and you are set to go. I even did this several times on non RGH consoles, boards for liteons are same for every one, only difference is the fw...

 

[Carlooch]

Finally I got it to restore. And authorize. Thanks a bunch for all the help. I'll let you guys know how it works out


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Thu Apr 26 10:03:22 2012



This is a Wow 64 process running on 2 x 64 bit CPUs

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 1 Com Ports.

Found 7 windows drives C: D: F: G: H: I: Q:

Found 1 CD/DVD drives D:



Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

....................

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Loading firmware file C:\Users\carl\Desktop\slim rgh drive\Dummy.bin

MD5 hash: d1ba43aefb40f7ce2bda388d70051930

Inquiry string found

Identify string found

Drive key @ 0xA030 353EEBD79ECDE961D030C68B7796DE8B

Firmware Osig: [PLDS DG-16D4S 0401]

Firmware is: SlimKey Extract

Auto-Loading firmware file C:\Users\carl\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0401-v3.0.bin

MD5 hash: 87fba52607d01d3c73722f9f818588c9

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0401]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target





Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Done !



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................

............

Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Dumped in 4396mS



Write verified OK !



Restoring sector 0x3E000.



Sending Sector Erase to Port 0x0000

Erasing: 0x3E000

Writing: 0x3E000

............

Authorised !

................

Restore verified OK !

Drive is Slim Lite-On..

 

[Oggy]

You mean once you stopped manually loading a fw you didn't need, it worked?

Who'd of thunked it.

Sent from my GT-I9100 using Tapatalk

 

[Carlooch]

Ok, reads games fine, thanks a bunch to all

 

[Carlooch]

You mean once you stopped manually loading a fw you didn't need, it worked?

Who'd of thunked it.

Sent from my GT-I9100 using Tapatalk

Since it was a 9504 I thought I had to manually spoof my dummy on to the 0272 FW. Thanks for the sarcasm, always get a healthy dose of it when I ask a question over here.

 

[k0mpresd]

but it wasnt 9504. thats the thing. when you loaded your dummy jf autoloads the correct version firmware, which was 0401.

 

[jsinger47]

Since it was a 9504 I thought I had to manually spoof my dummy on to the 0272 FW. Thanks for the sarcasm, always get a healthy dose of it when I ask a question over here.

for future reference, you always use the fw of the drive that was originally in the xbox

you don't use the fw type the original drive is