How come that after you q-tip an xbox, it works?
My jtag had 0021 and now it works? I just don't understand it.
My jtag had 0021 and now it works? I just don't understand it.
JTAG Q-tipping questions
- Thread starter DiGiTaL sPiTT
- Start date
BL4K3Y
VIP Member
Vinneh
VIP Member
BL4K3Y
VIP Member
Not to mention a terrible "fix" to be even contemplating.
The CPU and GPU get hot enough as it is and without the fans connected and operational, you are just asking for trouble!
Last edited:
because its slightly heating up the GPU causing the connection to reattach but its a cold solder joint that will likely crack quickly. That way only gets up to about 150C max - which is less than a proper reflow does just to preheat - let alone come close to proper flowing temp of 220C
Hi.
This is same as the towel trick. it causes the xbox to overheat temporarily fixing the console.
This will not last you may get a few hours or a few weeks but the best thing to do is get a professional repair.
Stopping the fans to overheat the console will cause more harm than good
This is same as the towel trick. it causes the xbox to overheat temporarily fixing the console.
This will not last you may get a few hours or a few weeks but the best thing to do is get a professional repair.
Stopping the fans to overheat the console will cause more harm than good
What everyone else said.
You shouldn't do this since it can cause capacitors to blow, which is then makes it harder to fix!
You shouldn't do this since it can cause capacitors to blow, which is then makes it harder to fix!
Ticallion
BANNED
Yeah not for long though, I wouldn't start a new game or anything, you won't get far.
XL3THAL VIP3RX
VIP Member
not bad to say in the video TUT from TX ,for the v2 RROD fix it tells you to bake the xbox like this....not with the q-tip like....just unplug the fan lol