question about .ecc

[H311B0Y]

hey guys! ive been messin around with the rgh for the past 2 weeks now reading and trying.i managed to have a falcon glitch but it takes for ever to boot but thats another thing now im working on a 512 jasper and it just wont glitchtried changing wires moving wires isulate them and still no go.
question is:when i use jtag tool to create the .ecc write it with it and power cycle i get a green light flashing but if i create the .ecc with multibuilder 0.7 the green light flashes once only
anyone knows why?

 

[Krafter]

Is the DVD drive in or out when you are doing this?

 

[rexdale]

talkin about the 360 light or the coolrunner green light?
Also, have u tried using a cap across GND and A

 

[H311B0Y]

out

---------- Post added at 22:04 ---------- Previous post was at 22:03 ----------

green light on cool runner and yes its a rev b i tried cap bridge and not

---------- Post added at 22:06 ---------- Previous post was at 22:04 ----------

forgot to say that i write multibuilder .ecc with jtag tool too

 

[rexdale]

then my guess would be to change the wire positioning, or check the solder. I created my .ecc from jtag tool and .bin from multibuilder, and had no problem. The .ecc from multibuilder should be the same tho

 

[H311B0Y]

what i find weird with multibuilder it says that the 6751 is not compatible with the glitch hack a donor 6750 will be used instead maybe thats why the green light blinks only once but like i said with the ecc from jtag tool green light will blink but still no xell

 

[H311B0Y]

so no one can answer that one?

 

[rexdale]

have u tried moving the wires around?

 

[BL4K3Y]

what i find weird with multibuilder it says that the 6751 is not compatible with the glitch hack a donor 6750 will be used instead maybe thats why the green light blinks only once but like i said with the ecc from jtag tool green light will blink but still no xell

A donor NAND with CB 6750 will indeed be used if your console has a CB of 6751.... I have always used Python and command prompt to build my ECC images, each one has worked perfectly fine.

Could you post up some images of your wiring?

Also, you could try the OPUS fileset on your Falcon console to increase boot times (Falcons will usually boot instantly).

 

[dantok]

H311Boy, i believe you`re having the same problem as i am. I`ve also got this problem. I wrote xell with the normal ECC file from MultiBuilder, however, the Green LED on the CoolRunner Blinks once or twice and then stops, and a black screen aye?

---------- Post added at 07:01 ---------- Previous post was at 07:00 ----------

I`m also running on CB 6571. using the Donor Nand.