Hi i want to know is there any method to flash Xecuter 3 without a xbox, i mean with an external programmer or something, i've have done a bad flash and xbox does not start normally, if it helps it is an "v1.6 with Xecuter 3", and i have one "xbox v1.2 with Xecuter 2.6 lite" working, Thanks.
Question about Flashing Xecuter 3.
- Thread starter iruinea
- Start date
Martin C
VIP Member
You have a few options open to you.
If you have a 1.6 (not 1.6b), you should be able to boot from the backup BIOS and get access to FlashBIOS from there.
If you have a 1.6b, you'll need FlashBIOS 3.0.3. This is on banks 5678 on a X3CE. If you've written over this, you can use your 2.6 to hot swap the x3 and reflash it that way.
Martin
If you have a 1.6 (not 1.6b), you should be able to boot from the backup BIOS and get access to FlashBIOS from there.
If you have a 1.6b, you'll need FlashBIOS 3.0.3. This is on banks 5678 on a X3CE. If you've written over this, you can use your 2.6 to hot swap the x3 and reflash it that way.
Martin