I have an old Falcon 360 which I just repaired from 3RROD. It has dash 8955 on it. I know it never used to be possible but can it be JTAGed at this point, or is RGH my only option?
JTAG Question about JTAG
- Thread starter Shaneee
- Start date
DBTarmac
VIP Member
DBTarmac
VIP Member
One last question. Does it matter with the RGH which dashboard is on it? Would it be ok if I connected to live and updated it?
DBTarmac
VIP Member
Dont update to the latest Dash. you need your Nand and CPU key first. If you are going to update to latest and RGH later go to 14717/14719. Get your Nand and cpu key. then you can go to the latest and RGH later.
Ok then. Just to double check is this what I need?
Code:
http://www.xconsoles.com/products/xecuter-nandx-rgh-edition.html
http://www.xconsoles.com/products/xecuter-coolrunner-revc.htmlDBTarmac
VIP Member
Grab the Nand and CPU key before you do anything.
RGH1 the console then you can update from there. RGH and Jtag are basically 2 different methods to get to the same result - running unsigned code (homebrew)
And yes, all you need is a Nand X and a coolrunner.
If you want to use the QSB's then I would pick this one up
The one in the kit doesn't have point for the orange (STBY_CLK) wire and it can be a bitch to wire if you're not great at soldering.
RGH1 the console then you can update from there. RGH and Jtag are basically 2 different methods to get to the same result - running unsigned code (homebrew)
And yes, all you need is a Nand X and a coolrunner.
If you want to use the QSB's then I would pick this one up
The one in the kit doesn't have point for the orange (STBY_CLK) wire and it can be a bitch to wire if you're not great at soldering.
Last edited:
If I was to buy what you linked to would I still need to buy both the items I posted?