Question about PCI RAID SATA card

[Ice]

Hi everyone. I have been trying to get my Xbox flashed
but my SATA card is not working properly. I have
a VIA VT 6421L PCI SATA Card (RAID) which can be
seen here.
At first when I installed it I had some trouble, Widows said
the drivers were not properly installed so I uninstalled them
and reinstalled them (from the driver disc) and Windows said
it STILL was not installed properly so I went to newegg and
went to the manufacturer's site and downloaded the latest drivers. After searching through the drivers I found the Windows XP drivers and installed them with device manager.
I then rebooted the computer and it worked. YAHHH!! So now I tried to flash the drive and the card still won't show up on the list of cards.
I basically need to know if I have to configure the card to
run in non RAID in the computer's bios because I don't
think that Disc drives are RAID capable (after all they aren't
hard drives).
I also noticed that when the card was "not working" that under Xtreme bootmaker it said the card's
name was "RAID controller" but after I got Windows to say
the card was working correctly XBM called it "VIA 6421 RAID
controller" or something like that.

If anyone has any ideas or suggestions please post them.

 

[hubbley2k]

uninstall the drivers then get the latest drivers from the VIA website.....

on install you will get to a point where it gives two things to install (box's with ticks)

untick the RAID tool and only install the drivers

then it should work

 

[Ice]

That sounds like what the problem is. I will try it when
I can use the computer later.
Hopefully that will work.
And thank you for your suggestion