GENERAL Question concerning error code

[MI666]

As it Say's in my Title.
Yesterday I flashed my drive back to stock and
now I can't do the update.

Error code 351F-3524-1380-0703-C000-0099

I have the phat MW 360 with xecuter blaster
on it.
I was running LT 1.91 until yesterday:rolleyes2:

I run JF put in the old dummy as source and as target
I used the OFW that I got with the new LT 2.0
that I had Downloaded.
I used the 83850 v2 FW, because that was my
originele Firm.

Now I did the Dash update, with blaster in off mode
and I got the error code.

What I've bin reading is that my box probably bin flagged
now, others say that I can fixed it and I have to
run the other FW (0251) that sits in the other map
that came with the download.

Is this true or am just f**k it up for myself an did
I just do something wrong in process, like, put
the blaster off or just put in the wrong OFW.
Or did I just had to put in LT 2.0, like I always
did, I never put the OFW back when doing an update.
This is the first time I did, major bummer.:mad2:

The main question for me is, what the hell went wrong.

 

[sp4rkst4rt3r]

OK....What dashboard were you on before you did the latest update?

 

[BGAMods]

what dash was you on before updating?

 

[MI666]

I put the Stock FW in that came with LT 2.0 download,
that I got at ixtreme.
There are 2 maps in it, I used the Lite-on pre 13141
configuration, as I sad Originally the box was a
83850 v2, that's why I never flashed it back to
originally because I found confusing.
So never bothered to go back and the forward:redface:

Oeps I forgot, I had the latest Dash before this update, to
answer your question

 

[sp4rkst4rt3r]

I put the Stock FW in that came with LT 2.0 download,
that I got at ixtreme.
There are 2 maps in it, I used the Lite-on pre 13141
configuration, as I sad Originally the box was a
83850 v2, that's why I never flashed it back to
originally because I found confusing.
So never bothered to go back and the forward:redface:

Which STOCK?

Pre 13146 or Post 13146?

It is important we know what dash it was prior to you flashing the drive to give you the correct advice!

 

[MI666]

:redface:

I put the Stock FW in that came with LT 2.0 download,
that I got at ixtreme.
There are 2 maps in it, I used the Lite-on pre 13141
configuration, as I sad Originally the box was a
83850 v2, that's why I never flashed it back to
originally because I found confusing.
So never bothered to go back and the forward:redface:

Oeps I forgot, I had the latest Dash before this update, to
answer your question

 

[sp4rkst4rt3r]

:redface:

Don't edit your post it messes up the flow of info :frown:

OK did you have 13599 or 13604?

13604 was only released 3 days ago

 

[talby71]

that error code looks like the banned code
and if i understand what you have typed, you flashed to the old stock 83850firmware instead of the 02510c stock firmware

 

[MI666]

I didn't, I only put the markers on it haha

And I frankly have no idea what you referring to.
The latest dash update I did was a few months
back, I had to put LT 1.91 in it because you
couldn't go on line no more.

---------- Post added at 12:41 ---------- Previous post was at 12:38 ----------

Yeah, probably.

But the frustrating thing is that I have now clue what went wrong.

 

[sp4rkst4rt3r]

I didn't, I only put the markers on it haha

And I frankly have no idea what you referring to.
The latest dash update I did was a few months
back, I had to put LT 1.91 in it because you
couldn't go on line no more.

---------- Post added at 12:41 ---------- Previous post was at 12:38 ----------

Yeah, probably.

But the frustrating thing is that I have now clue what went wrong.

OK....so you need Post 13146 OFW as target

Note:- Not sure why but in the latest iXtreme FW pack it says 13141 but it isn't because the dash version was 13146 (just in case of any confusion)...lols

 

[diaboliq20]

I think talby is right - you would no doubt have had 13146 dash - shich made your Lite-on a 02510C no the 83850 it was originally.....so u flashed the wrong stock fw to it - you have now been banned - or at least flagged.....
u will need to flash the 02510C fw and continue the update

 

[MI666]

Damn, thats why I never went back before going
forward.:mad2:
So it would had have bin a better idea for me to
just put in the LT 2.0 and than went for the update.

Why are the still putting the old Stocks in it, while
you can not use them??
Put them in a separate download:facepalm:

Well, tonight I am going to try to pros pone the
execution:rolleyes2:

And about the blaster, I thought when you putt
the thing in off mode, it was seen as original

But thanks for the quick reply' s gentlemen

 

[diaboliq20]

no the blaster just allows u to flash the drive without opening your case really.......
some people are on older dashboards that's ewhy they include ALL fw in there - it's up to u to pick the right folder that's all......

 

[talby71]

you are supposed to put in the correct stock firmware that is relevant to the dashboard...some people still have old dashboards ...that's why the old stock firmware is obviously in the pack

lol beat me to it

 

[MI666]

And I'm just the idiot that got foul by it:rolleyes2:

Well, I'm now going to try and flash it again, hope
that I can get it to work, like some off the other guys
that I read the story from.

fingers crossed haha

 

[MI666]

The first part went oke, I flashed it with 02510c and
did the update.
Nothing went wrong there and live worked.
Seemed I real was one off the idiot's that indeed
just got the wrong stock:crazy:

No I"m going to flashing it with LT 2.0

O, by the way i ran it true xval and it says reg data
is clean, for it's word mentioning.



Oke, little update.
LT 2.0 is on and for now it's running fine.

But another stupid question.
Now I want to do my brothers 360, its the same one as mine,
but he never did the second last update.
So, I guess that I now have to put in the the 83850c v2 stock
and then do the update?