Is there a big difference in the 1.6 vs the 1.6b? I mean for installing an X3? I know it has to be flashed with the new cromwell first but other than that?
QUESTION ON 1.6B BRAND NEW
- Thread starter junkman2
- Start date
Martin C
VIP Member
with the proper flash bios on the chip, there is no difference to the end user with a 1.6 or 1.6B they are one in the same, put an older flashbios on the chip, and well, you will certainly know the difference lol
k, thats what I thought but I havent opened my new 1.6b so I just wantd to make sure nothing has changed. :mrgreen:
liteon 83850c V2 - jungleflasher status 0x51
Hi,
I am getting an error message "Device Intro Failed" and type status 0x51.
I checked my trace cuts and they're clean. I didn't solder because I have the LT Switch V2 + LT clip.
I followed JungleFlasher tutorial and nothing.
I tried resetting the power multiple times and nothing.
Maybe I'm using an onboard SATA. Can someone verify if this works? or provide technical help?
Thanks.
Chipset
-------------------------------------------------------------------------
Northbridge AMD 790FX rev. 00
Southbridge AMD SB700 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Unganged)
Memory Frequency 401.4 MHz (1:2)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 24
Command Rate (CR) 2T
Uncore Frequency 1806.1 MHz
Hi,
I am getting an error message "Device Intro Failed" and type status 0x51.
I checked my trace cuts and they're clean. I didn't solder because I have the LT Switch V2 + LT clip.
I followed JungleFlasher tutorial and nothing.
I tried resetting the power multiple times and nothing.
Maybe I'm using an onboard SATA. Can someone verify if this works? or provide technical help?
Thanks.
Chipset
-------------------------------------------------------------------------
Northbridge AMD 790FX rev. 00
Southbridge AMD SB700 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Unganged)
Memory Frequency 401.4 MHz (1:2)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 24
Command Rate (CR) 2T
Uncore Frequency 1806.1 MHz
Re: liteon 83850c V2 - jungleflasher status 0x51
i got the same problem with my 74850c liteon i cant erase the drive
i got the same problem with my 74850c liteon i cant erase the drive
Re: liteon 83850c V2 - jungleflasher status 0x51
http://robinhoodsplayground.com/forum/viewtopic.php?f=195&t=7783
snapcrackleing said:
http://robinhoodsplayground.com/forum/viewtopic.php?f=195&t=7783
Re: liteon 83850c V2 - jungleflasher status 0x51
Are you getting the correct lights from the LT Clip and switch indicating that your trace cuts and fine?
Make sure the clip is not shorted to another point on the PCB, incase you have scraped to much of the coating away under clip.
Are you getting the correct lights from the LT Clip and switch indicating that your trace cuts and fine?
Make sure the clip is not shorted to another point on the PCB, incase you have scraped to much of the coating away under clip.