Questions About Nand-x

[The504]

Ok I'm going to Jtag my Xenon with Nand-x

I need to know:

1. Do I only use the Nand Connectors

2. Do i Connect and solder all the boards?

3. Do I just solder the quick solder boards on?

And some advise

I'm using Jtag Tool 2.01

 

[rocket8080]

Have a look at this

http://team-xecuter.com/forums/showthread.php?t=54423

I would also use jtag tools 1.74 as well. People have been having problems with revision 2.01

 

[The504]

So I'm going to use the Pins. Is that the same thing when using the quick solder boards right also I used 2.01 recently it worked good.

 

[rocket8080]

Yes the pin headers are the same. If your soldering skills are not the best you might have less problems using them.

 

[The504]

I got pretty good skills and another thing what Diodes or resistors and what gauge wire do i use?

 

[rocket8080]

BAT41 or 1N4148 diodes, I always use wire from a cat5 cable.

 

[The504]

Thanks man

 

[rocket8080]

No probs mate, happy jtagging!!!!