so basically i never use it anymore and i want to let my son have it. but he doesn't need it to be rgh'd and i dont want to undo it because someday i might want to play with it again. so my question is, if i program the consoles stock image on the demon and leave everything installed will it perform normally with both nands in a retail mode? i just want to know if my cr3 pro will have any affect on booting a stock dash.
GENERAL Quick Demon question.
- Thread starter ANG3LK1LL3R127
- Start date
BL4K3Y
VIP Member
Why don't you just leave the retail side stock and keep the glitch image on the DemoN's NAND?
The point of dual NAND is two NANDs - one stock and one glitch.
The point of dual NAND is two NANDs - one stock and one glitch.
MrBucket101
VIP Member
I think he's worried his son might somehow get the xbox banned, or mess something up by accidentally booting into the 2nd nand.
Can't you just disconnect the daugherboard, and the optional SYNC wire? That way there won't be anyway to boot into the 2nd nand.
Can't you just disconnect the daugherboard, and the optional SYNC wire? That way there won't be anyway to boot into the 2nd nand.
BL4K3Y
VIP Member
That wouldn't work because the DemoN's NAND is chosen by default when power is applied to the console.
OP: You can write the stock NAND image to the DemoN if you want to, but you will need to desolder the 5V wire from the CR3 Pro.
