Pls helP I just got the NAND x kit and I lifted 2 quick solder pads pls help me here I really need to fix this
Quick solder pads lifted what do I do?
- Thread starter etgamingx
- Start date
http://www.team-xecuter.com/forums/showthread.php?t=55120
does this help?
or just solder directly to the board
does this help?
or just solder directly to the board
Last edited:
i dont know what QSB you messed up, but you can cut the plug end off, and solder wires directly to the motherboard, you can follow the guide and run jumpers to alternate points from the guide i pointed you to.
Martin C
VIP Member
Which tells me you don't have everything good.
Are you allergic to providing more information? Could you be as detailed as possible?
How long does it take to 'red-ring'?
What's the secondary error code?
Can you post pics of your install?
i lifted a couple pads on the qsb's and i soldered to the alternate point on them and even b4 that i still got red rings. i checked all the connections and they all seem fine . sometimes ill get 1 red ring and sometimes 3 red rings on it.. on screen shows a bunch of floating dotted line my cb is 1903 so its explitable
keil423
VIP Member
Your to kind playingmax. That looks like it was set on fire or something.
OP I'm affraid to say that you need to send that thing to someone who actually knows what they are doing. Some people just are not cut out for this stuff.
Post you location and you will get some prices.
If in the USA My price to fix would be $50 plus shiping both ways. Provided that you have the OG nand dump
[email protected] hell man what you using to solder with i am surprised it works ever again
have you actually ever soldered before cos thats really really bad surely you would of realised when you did the first bit of soldering
what W is your IRON
did you use flux
looks like the spawn of frankinstine
surprised if anyone will even go near this monstrosody
have you actually ever soldered before cos thats really really bad surely you would of realised when you did the first bit of soldering
what W is your IRON
did you use flux
looks like the spawn of frankinstine
surprised if anyone will even go near this monstrosody
Martin C
VIP Member
Looks like he didn’t even use a blowtorch lol more like he threw in some timber and some matches
Advice: get in touch with someone who can do the job for you! if you proceed you'll only make it worse and completely f...K the pads on the board.."It will then cost you a lot more to fix"