Console Type: Japser
NAND size: 512
CB version: 6723
When I try to start my xellreloaded image on the r-jtag with the demon I get this from post:
J-runner:
It looks like it boots but the screen is just black.
NAND size: 512
CB version: 6723
When I try to start my xellreloaded image on the r-jtag with the demon I get this from post:
Code:
Version: 10
Power Up
Waiting for POST to change
Post 82 - Panic - DATA_STORAGE
Post 92 - Panic - 1BL is executed on wrong CPU thread (panic)
Post F2 - Panic - SHA_VERIFY_CB_B
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 8A - Panic - DECREMENTER
Post FA
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 8C - Panic - SYSTEM_CALL
Post CC
Post 8C - Panic - SYSTEM_CALL
Post CC
Post FC
Post CC
Post FC
Post CC
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post DC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 88 - Panic - PROGRAM
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post CC
Post 8C - Panic - SYSTEM_CALL
Post CC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post CC
Post 8C - Panic - SYSTEM_CALL
Post CC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post FC
Post 8C - Panic - SYSTEM_CALL
Post 15 - FETCH_OFFSET
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 5A - INIT_XEX_TRAINING
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Shutdown
Code:
===================================================
3. august 2013 15:18:42
J-Runner v0.2 Beta (289) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Filechecks disabled - No Filechecks carried out
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_aud_clamp.bin
Current: DemoN
Switching to XBOX
Success
Current: XBOX
Switching to DemoN
Success
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x1
Writing Nand
Done!
in 0:02 min:sec