Team-Xecuter Community
Console Type: (Zephyr/Falcon/Opus/Jasper)
NAND size: 16/256/512
Dashboard version: 2.0.16537
CB version: 5774
J-Runner log:
Image of R-JTAG board: Added
Images of close-up soldering to motherboard: Added
(attach images to your post)
Description of problem: The R-JTAG board smokes every time I plug in the power for the 360 but the green LED (on R-JTAG) glows when I power on the console. Yet I get random error codes on every DIP I try like 0022, 0132 and 1022. I solved 0022 by writing original NAND back then writing Xell again once I did the R-JTAG started smoking, I tried bridging the 1.2v points on the R-Jtag Chip but the green LED doesn't light up at all. Console works when returned to stock NAND. I also noticed that the part circled in the picture heats up and is the source of smoke.
Was the console working before you started: Y/N
View from Top:
NAND size: 16/256/512
Dashboard version: 2.0.16537
CB version: 5774
J-Runner log:
PHP:
Monday, March 10, 2014 10:29:42 PM
J-Runner v0.3 Beta (4) Started
Version: 01
Flash Config: 0x00000000
Can not Continue
Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 00
Wrong Version.
Falcon Manually Selected
===================================================
Monday, March 10, 2014 10:35:03 PM
J-Runner v0.3 Beta (4) Started
It's advised to run in administrator mode on Windows 8
Checking Files
Finished Checking Files
===================================================
Monday, March 10, 2014 10:35:13 PM
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Falcon Manually Selected
Version: 00
Wrong Version.
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
===================================================
Monday, March 10, 2014 10:37:34 PM
J-Runner v0.3 Beta (4) Started
Checking Files
Version: 01
Finished Checking Files
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Power Up
Version: 01
Flash Config: 0x00000000
Can not Continue
Update
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Version: 01
Flash Config: 0x00000000
Can not Continue
===================================================
Monday, March 10, 2014 11:14:28 PM
J-Runner v0.3 Beta (4) Started
Version: 01
Checking Files
Flash Config: 0x00000000
Can not Continue
Finished Checking Files
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 3:21 min:sec
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump3.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:21 min:sec
Comparing...
Nands are the same
XeLL file created Successfully falcon.bin
Version: 01
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:18 min:sec
===================================================
Tuesday, March 11, 2014 8:42:35 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Jtag Selected
R-Jtag Selected
Falcon Manually Selected
===================================================
Tuesday, March 11, 2014 8:43:38 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Comparing...
Nands are the same
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 00
Wrong Version.
===================================================
Tuesday, March 11, 2014 9:02:55 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Version: 00
Wrong Version.
R-Jtag Selected
Version: 00
Wrong Version.
Version: 00
Wrong Version.
Power Up
Version: 00
Wrong Version.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
===================================================
Tuesday, March 11, 2014 9:10:54 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Bootloader Attached
Bootloader Version: 1.0.4
Bootloader Removed.
Bootloader Attached
Bootloader Version: 1.0.4
Erasing Flash ...
Writing Flash: ....................................................................................................
Done!
Verifying Flash: ....................................................................................................
Write Verified!
Restarting Device ...
Finished!
Bootloader Removed.
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5770
Falcon/Opus
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump1.bin
Cancelled
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Version: 01
Flash Config: 0x01198010
Writing Nand
nanddump1.bin
Done!
in 3:41 min:sec
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 3:21 min:sec
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Cancelled
Comparing...
0x0068
0x0069
0x03DE
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump1.bin
Cancelled
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 3:21 min:sec
Reading Nand to C:\Users\Quneibi\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec
Comparing...
Nands are the same
Comparing...
0x0068
0x0069
0x03DE
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Comparing...
0x0068
0x0069
0x03DE
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Comparing...
Nands are the same
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon.bin
Initializing falcon.bin..
Header is wrong..
Falcon/Opus
Nand Initialization Finished
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon.bin
Version: 01
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:18 min:secImage of R-JTAG board: Added
Images of close-up soldering to motherboard: Added
(attach images to your post)
Description of problem: The R-JTAG board smokes every time I plug in the power for the 360 but the green LED (on R-JTAG) glows when I power on the console. Yet I get random error codes on every DIP I try like 0022, 0132 and 1022. I solved 0022 by writing original NAND back then writing Xell again once I did the R-JTAG started smoking, I tried bridging the 1.2v points on the R-Jtag Chip but the green LED doesn't light up at all. Console works when returned to stock NAND. I also noticed that the part circled in the picture heats up and is the source of smoke.
Was the console working before you started: Y/N
View from Top: